AT25DL081 Datasheet, PDF (1/59 Pages) List of Unclassifed Manufacturers – 8-Mbit, 1.65V Minimum SPI Serial Flash Memory with Dual-I/O Support

AT25DL081
8-Mbit, 1.65V Minimum SPI Serial Flash Memory
with Dual-I/O Support
Features
DATASHEET
 Single 1.65V - 1.95V supply
 Serial Peripheral Interface (SPI) compatible
 Supports SPI Modes 0 and 3
 Supports RapidS^™ operation
 Supports Dual-Input Program and Dual-Output Read
 Very high operating frequencies
 100MHz for RapidS
 85MHz for SPI
 Clock-to-output time (t_V) of 5ns maximum
 Flexible, optimized erase architecture for code + data storage applications
 Uniform 4KB, 32KB, and 64KB Block Erase
 Full Chip Erase
 Individual sector protection with Global Protect/Unprotect feature
 16 sectors of 64KB each
 Hardware controlled locking of protected sectors via WP pin
 Sector Lockdown with permanent freeze option
 Make any combination of 64KB sectors permanently read-only
 128-byte, One-Time Programmable (OTP) Security Register
 64-bytes factory pre-programmed, 64-bytes user programmable
 Flexible programming
 Byte/Page Program (1 to 256 bytes)
 Fast Program and Erase times
 1.0ms typical Page Program (256 bytes) time
 50ms typical 4KB Block Erase time
 250ms typical 32KB Block Erase time
 550ms typical 64KB Block Erase time
 Program and Erase Suspend/Resume
 Automatic checking and reporting of erase/program failures
 Software controlled reset
 JEDEC Standard Manufacturer and Device ID Read Methodology
 Low power dissipation
 10mA Active Read current (typical at 20MHz)
 8μA Deep Power-Down current (typical)
 Endurance: 100,000 program/erase cycles
 Data retention: 20 years
 Complies with full industrial temperature range
 Industry standard green (Pb/halide-free/RoHS-compliant) package options
 8-lead SOIC (0.150” wide)
 8-pad Ultra-thin DFN (5 x 6 x 0.6mm)
 8-ball dBGA (WLCSP)
8732E–DFLASH–1/2013