AT25DF641_13 Datasheet, PDF (1/56 Pages) List of Unclassifed Manufacturers – Minimum Serial Peripheral Interface Serial Flash Memory

Features
• Single 2.7V − 3.6V Supply
• Serial Peripheral Interface (SPI) Compatible
 Supports SPI Modes 0 and 3
 Supports RapidS Operation
 Supports Dual-Input Program and Dual-Output Read
• Very High Operating Frequencies
 100MHz for RapidS
 75MHz for SPI
 Clock-to-Output (t_V) of 5ns Maximum
• Flexible, Optimized Erase Architecture for Code + Data Storage Applications
 Uniform 4-Kbyte Block Erase
 Uniform 32-Kbyte Block Erase
 Uniform 64-Kbyte Block Erase
 Full Chip Erase
• Individual Sector Protection with Global Protect/Unprotect Feature
 128 Sectors of 64-Kbytes Each
• Hardware Controlled Locking of Protected Sectors via WP Pin
• Sector Lockdown
 Make Any Combination of 64-Kbyte Sectors Permanently Read-Only
• 128-Byte Programmable OTP Security Register
• Flexible Programming
 Byte/Page Program (1- to 256-Bytes)
• Fast Program and Erase Times
 1.0ms Typical Page Program (256-Bytes) Time
 50ms Typical 4-Kbyte Block Erase Time
 250ms Typical 32-Kbyte Block Erase Time
 400ms Typical 64-Kbyte Block Erase Time
• Program and Erase Suspend/Resume
• Automatic Checking and Reporting of Erase/Program Failures
• Software Controlled Reset
• JEDEC Standard Manufacturer and Device ID Read Methodology
• Low Power Dissipation
 5mA Active Read Current (Typical at 20MHz)
 5µA Deep Power-Down Current (Typical)
• Endurance: 100,000 Program/Erase Cycles
• Data Retention: 20 Years
• Complies with Full Industrial Temperature Range
• Industry Standard Green (Pb/Halide-free/RoHS Compliant) Package Options
 16-Lead SOIC (300-mil wide)
 8-Contact Very Thin DFN (6 x 8mm)
64-Mbit, 2.7V
Minimum Serial
Peripheral Interface
Serial Flash Memory
AT25DF641
3680F–DFLASH–4/10