ARINC404 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – ARINC Filter Connectors

ARINC Filter Connectors
404 and 600
ARINC 404 & 600 Filter Connectors
INTRODUCTION
CarlisleIT manufactures ARINC 404 and ARINC 600
filter connectors with QPL’d interfaces, front removable,
front release size 22 contacts and modular construction.
Depending on performance requirements these connectors
can be designed using either planar or chip-on-board
technologies. All meet ARINC specification requirements,
are available in all the standard arrangements and come
with PC tail, solder cup, crimp or wire wrap termination.
DESIGN BENEFITS
» Front release front removable #22 contacts
» Planar and/or Chip on Board design
» Ferrite immobilization
» Modular filter backpack/standard shell construction
» Can incorporate filtering plus Transient Voltage
Suppression
DESIGN CONSIDERATIONS
Rectangular
ARINC 404
ARINC 600
Mating End
Contacts
Pin
Socket
Filter Types*
C
C/Pi
Pi
Pi/TVS
TVS
* Maximum or Mixed Capacitance Requirement? ____pF
Electrical Environmental
Feed Thru Contacts
Ground Contacts
DWV min ____ VDC
Thermal Cycle
Thermal Shock
Burn-in
SEALED
Mounting
Hardware
Clinch Nut
Helicoil
Contact
Terminations
PC Tails
Soldercup
Crimp
Wire Wrap
Carlisle Interconnect Technologies / 102 West Julie Drive, Tempe, AZ 85283
Phone - 480.730.5700 / Fax - 480.730.5800 / CarlisleIT.com