APT-DINAV53G3 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – 3-channel Power Transducer

Energy Management
3-channel Power Transducer
Type APT-DIN
• Measurement of: kW
• 9 selectable full-scales
in 9 intervals from 0 to 5 (range from 0,4kW to 3,6kW)
• Degree of protection (front): IP 50
• 3 analogue outputs (0 to 10VDC)
• Response time: ≤50ms
Product Description
Ordering Key
Active power transducer
with auxiliary power sup-
ply of 400VAC (phase-
phase connection). 9 mea-
suring ranges selectable in 9
intervals from 0 to 5 (measur-
ing range from 0,4 to 3,6kW)
The house is for DIN-rail
mounting and ensures a
degree of protection (front)
of IP 50.
Model
Range code
System
Power supply
Rated outputs
Number of inputs
Calibration
APT-DINAV53G3 2 1
Type Selection
Range code
System
Power supply
Rated outputs
AV5: 400 VAC - 5,2 AAC
(max. 480 V (L-L) -
6,2 A) (standard)
Number of inputs
3: Three phase system D: 230VAC –15+10%
(3 wires, balanced/
50/60Hz
unbalanced load)
G: 400VAC –15+10%
Calibration
50/60Hz
3: 3 x (0 to 10VDC)
2: 2 x (3-phase inputs) ^{1 : 3600W.}
Input Specifications
Rated inputs
Accuracy
Active power
(@ 25°C ± 5°C, R.H. ≤ 60%)
Additional errors
Humidity
Input frequency
Magnetic field
Ripple
2 (3-phase inputs) for current
and voltage measurements
±3% rdg (cos ϕ 0.7 L/C,
0.5 to 1Ph)
< 0.5%, 60% to 90% R.H.
< 0.5%, 50 to 60 Hz
< 0.5% @ 400 A/m
balanced load: ≤1% accor-
ding to IEC 60688-1 and
Measurement
Ranges (impedances)
AV5:
Frequency range
Over-load protection
Continuous: voltage/current
For 1 s
Voltage:
Current:
EN 60 688-1
unbalanced load: ≤5%
kW
400VAC (≤2W per channel)
5.2AAC (≤0.3 VA per channel)
48 to 62 Hz
1.2 x rated input
2 x rated input
20 x rated input
Output Specifications
Analogue outputs
Number of outputs
Range
Response time
Temperature drift
Load: 10 V output
3 (one per channel)
0 to 10 VDC
≤ 50 ms typical
±500 ppm/°C
≥ 10 kΩ
Analogue outputs
Insulation
Specifications are subject to change without notice
APT-DIN 3 DS0603
By means of optocouplers,
2000 Vrms output to
measuring input /
power supply
1