APSINT2012 Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – PowerVerter® APS INT Series 2000W Inverter/Charger with Auto-Transfer Switching and Hardwire Input/Output

PowerVerter® APS INT Series 2000W
Inverter/Charger with Auto-Transfer Switching and
Hardwire Input/Output
MODEL NUMBER: APSINT2012
Highlights
12V DC or 230V AC input; 230V,
50 Hz output (hardwired)
2000 watts continuous, 3000
watts OverPower and 4000 watts
DoubleBoost inverter output (see
specifications)
3 stage, selectable 15/60 amp
wet/dry cell battery charger
Auto Transfer Switching option
for battery backup / UPS
operation
Reliability enhanced
large-transformer design with
protected DC and AC wiring
terminals
Applications
Ideal for RVs, over-the-road
Description
Tripp Lite's APSINT2012 DC-to-AC inverter with automatic line-to-battery transfer and integrated charging
system serves as an extended run UPS, a standalone power source or an automotive inverter. Supplies up to
2000 watts of continuous 230V AC power from any 12V battery or automotive DC source. When hardwire AC
input is energized, commercial power passes through to connected equipment and the battery set is recharged
via 3 stage, selectable 15/60 amp charging system. In UPS mode, the APS system responds to blackouts and
voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output. Includes a set of
high current DC input terminals for simple installation (user supplies batteries and cabling - see owner's manual
for recommendations). Passes sine wave utility or generator power during battery charging and UPS line power
operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable large
transformer design, with frequency control powers resistive electronic loads or large inductive motors,
compressors and other items with high current needs on startup. Optional APSRM4 wired remote power switch
with full status LEDs provides remote power inverter on/off switching and continuous status information
(APSRM4 sold separate). Supports an unlimited amount of runtime with any number of user-supplied batteries
connected. Highly adaptable to a variety of applications and site conditions with adjustable charger settings for
trucking, conversion vans and
fleet service vehicles; a
standalone alternative power
source for off-grid, alternative
energy or export applications and
as an uninterruptible power
supply (UPS) for items
compatible with a 20 millisecond
transfer time. Moisture-resistant
construction enables vehicular or
marine operation in high humidity
environments. NOTE: For sump
pump applications, Tripp Lite
recommends its "UT" Utility Truck
Inverter/Chargers.
wet/gel battery types and selectable line to battery power transfer voltages.
Package Includes
Features
Supports 230V AC output from a 230V AC line power source or 12V DC battery source
20 millisecond automatic transfer between line and battery power supports UPS protection during blackouts
APSINT2012 Inverter/Charger
Instruction manual with warranty
information
and voltage fluctuations for equipment compatible with a one cycle transfer time
Double Boost inverter output supports momentary startup loads up to 200% of the continuous rating for up to 10 seconds (see specification chart)
OverPower inverter output supports longer duration overloads to 150% for 1-60 minutes under ideal battery and temperature conditions.
3 stage, 15/60 amp battery charger with adjustable settings for wet/gel battery types offers fast, reliable battery recharging
3 position operating mode switch supports "AUTO" mode to enable automatic transfer between DC and AC modes, CHARGE-ONLY to maintain a full
1/4