APS750_14 Datasheet, PDF (1/6 Pages) List of Unclassifed Manufacturers – PowerVerter® APS 750W Inverter/Charger with Auto-Transfer Switching and 2 Outlets

PowerVerter® APS 750W Inverter/Charger with
Auto-Transfer Switching and 2 Outlets
MODEL NUMBER: APS750
Highlights
12V DC or 120V AC input; 120V
AC output; 2 outlets
750 watts continuous, 1125 watts
OverPower™ and 1500 watts
DoubleBoost™ inverter output
3 stage, 20 amp selectable
wet/dry cell battery charger
Auto Transfer Switching option
for battery backup / UPS
operation
Reliability enhanced
large-transformer design with
protected DC wiring terminals
Applications
Versatile inverter/charger system with
auto-transfer switching serves as an
Description
Tripp Lite's APS750 DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system
serves as an extended run UPS, a standalone power source or an automotive inverter. Supplies up to 750 watts
of continuous 120V AC power to 2 AC outlets from any 12V battery or automotive DC source. OverPower™
inverter output feature temporarily provides up to 150% of the continuous output for 1-60 minutes and
DoubleBoost™ inverter output feature delivers up to 200% of the continuous output for up to 10 seconds,
providing the extra power needed to cold start heavy-duty tools and motorized equipment. When AC cable is
connected to a live wall socket, commercial power passes through to connected equipment and the battery set
is recharged via 3 stage, 20 amp charging system. In UPS mode, the APS system responds to blackouts and
voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output. Includes a set of
high current DC input terminals for simple installation (user supplies batteries and cabling - see owner's manual
for recommendations). Passes sine wave utility or generator power during battery charging and UPS line power
automotive inverter for RVs,
over-the-road trucking, conversion
vans and fleet service vehicles; a
standalone alternative power source
for off-grid, alternative energy or
export applications and as an
uninterruptible power supply (UPS) for
items compatible with a 16.6
millisecond transfer time. NOTE: For
sump pump applications, Tripp Lite
recommends its "UT" Utility Truck
Inverter/Chargers.
operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable large
transformer design, with frequency control powers resistive electronic loads or large inductive motors,
compressors and other items with high current needs on start-up. Optional APSRM4 wired remote power switch
with full status LEDs provides remote power inverter on/off switching and continuous status information
(APSRM4 sold separate). Supports an unlimited amount of runtime with any number of user-supplied batteries
Package Includes
APS750 Inverter/Charger
Instruction manual with warranty
information
connected. Highly adaptable to a variety of applications and site conditions with adjustable charger settings for wet/gel battery types and selectable line to
battery power transfer voltages.
NOTE: To protect against high current draw that may occur during inverter failure, a fuse link rated at 125a should be positioned no more than 18" from the
APS750's battery in the positive line.
Features
APS750 serves as an automotive or stationary DC-to-AC inverter with automatic line-to-battery transfer and integrated battery charger
Supports 120V AC output from a 120V AC line power source or 12V DC battery source
16.6 millisecond automatic transfer between line and battery power supports UPS protection during blackouts and voltage fluctuations for equipment
1/5