AOC-UIBF-M1 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – Compact and Powerful InfiniBand FDR Adapter

AOC-UIBF-m1
Compact and Powerful InfiniBand FDR Adapter
The AOC-UIBF-m1 is the most compact, yet powerful, InfiniBand adapter in the market. Based on the Mellanox® ConnectX-3
FDR controller with Virtual Protocol Interconnect (VPI), it provides the highest performing and most flexible server
interconnect solution for Enterprise Data Centers and High-Performance Computing environments. The AOC-UIBF-m1
simplifies system development by serving both InfiniBand and Ethernet fabrics in one hardware design. The AOC-UIBF-m1 is
designed to fit Supermicro UIO server systems.
Key Features
• Single QSFP Connector
• Low-profile UIO Form Factor
• PCI Express 3.0 (up to 8GT/s)
• Virtual Protocol Interconnect (VPI)
• 1µs MPI ping latency
• Up to 56Gbps InfiniBand or 40Gbps Ethernet
• CPU offload of transport operations
• Application offload
• GPU communication acceleration
• End-to-end QoS and congestion control
• Hardware-based I/O virtualization
• Ethernet encapsulation (EoIB)
• RoHS compliant 6/6
Specifications
• General
–– Mellanox® ConnectX-3 FDR controller
–– Compact size UIO form factor
–– Single QSFP port
–– PCI-E 3.0 x8 (8GT/s) interface
• Connectivity
–– Interoperable with InfiniBand or 10/40GbE switches
–– Passive copper cable with ESD protection
–– Powered connectors for optical and active cable support
• InfiniBand
–– IBTA Specification 1.2.1 compliant
–– Hardware-based congestion control
–– 16 million I/O channels
–– 256 to 4Kbyte MTU, 1Gbyte messages
• Enhanced InfiniBand
–– Hardware-based reliable transport
–– Collective operations offloads
–– GPU communication acceleration
–– Hardware-based reliable multicast
–– Extended Reliable Connected transport
–– Enhanced Atomic operations
• Ethernet
–– IEEE Std 802.3ae 10 Gigabit Ethernet
–– IEEE Std 802.3ba 40 Gigabit Ethernet
–– IEEE Std 802.3ad Link Aggregation and Failover
–– IEEE Std 802.3az Energy Efficient Ethernet
–– IEEE Std 802.1Q, .1p VLAN tags and priority
–– IEEE Std 802.1Qau Congestion Notification
–– IEEE P802.1Qaz D0.2 ETS
–– IEEE P802.1Qbb D1.0 Priority-based Flow Control
–– Jumbo frame support (9.6KB)
• Hardware-based I/O Virtualization
–– Single Root IOV
–– Address translation and protection
–– Dedicated adapter resources
–– Multiple queues per virtual machine
–– Enhanced QoS for vNICs
–– VMware NetQueue support
Compliance/Environmental
• RoHS Compliant 6/6, Pb Free
RoHS
compliant
• Additional CPU Offloads
–– RDMA over Converged Ethernet
–– TCP/UDP/IP stateless offload
–– Intelligent interrupt coalescence
• Flexboot™ Technology
–– Remote boot over InfiniBand
–– Remote boot over Ethernet
–– Remote boot over iSCSI
• Protocol Support
–– Open MPI, OSU MVAPICH, Intel MPI, MS
–– MPI, Platform MPI
–– TCP/UDP, EoIB, IPoIB, SDP, RDS
–– SRP, iSER, NFS RDMA
–– uDAPL
• Operating Systems/Distributions
–– Novell SLES, Red Hat Enterprise Linux (RHEL), and other Linux
distributions
–– Microsoft Windows Server 2008/CCS 2003, HPC Server 2008
–– OpenFabrics Enterprise Distribution (OFED)
–– OpenFabrics Windows Distribution (WinOF)
–– VMware ESX Server 3.5, vSphere 4.0/4.1
• Physical Dimensions
–– Card PCB dimensions (without end brackets):
14.29cm (5.63”) x 6.35cm (2.50”) (L x W)
–– Height of end brackets:
Standard – 12cm (4.73”), low-profile – 7.94cm (3.13”)
• Operating Condition
–– Operating Temperature: 0ºC to 55ºC
• Optional Accessories
–– CBL-0490L: 39.4” (100cm) QSFP to QSFP InfiniBand FDR 56Gbs Passive
Copper
–– CBL-0496L: 118.1” (300cm) QSFP to QSFP InfiniBand FDR 56Gbs Passive
Copper
Supported Platforms
• Supermicro UIO Server Systems with UIO slot
Please note that this product is only available as an integrated solution with Supermicro server systems
For the most current product information, visit: http://www.supermicro.com/products/nfo/networking.cfm#adapter
www.supermicro.com