AOC-PTG-I1S Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – 10 Gigabit Ethernet Adapter for High Density Systems

AOC-PTG-i1S
10 Gigabit Ethernet Adapter for High Density Systems
The Supermicro AOC-PTG-i1S is the most flexible and scalable 10 Gigabit Ethernet Adapter optimized for today’s demanding
data center environments. Incorporating the Intel® 10GbE network controller 82599EN, the AOC-PTG-i1S addresses the
demanding needs of next-generation data centers by providing features for virtualization and flexibility for LAN and SAN
networking with proven reliability and maximum performance. The AOC-PTG-i1s is designed for the industry’s most powerful
and high density Supermicro TwinPro SuperServer® family of products.
Key Features
• Single SFP+ Connector
• Proprietary 1U Form Factor
• PCI Express 2.0 (up to 5GT/s)
• Intel® QuickData Technology
• VMDq, Next-Generation VMDq, and PC-SIG SR-IOV
for Virtualized Environments
• Load Balancing on Multiple CPUs
• iSCSI Remote Boot Support
• Fibre Channel over Ethernet (FCoE) Support
• Support for most Network Operating Systems (NOSs)
• Support both DAC Twin Axial and LC Fiber-Optic Cables
• RoHS compliant 6/6
Specifications
• General
-- Intel® 82599EN 10GbE controller
-- Proprietary 1U form factor
-- Single SFP+ port
-- PCI-E 2.0 x8 (5GT/s)
-- Load balancing on multiple CPUs
-- iSCSI remote boot support
-- Fibre Channel over Ethernet (FCoE) Support
-- Intel® PROSet Utility for Windows® Device Manager
• I/O Features:
-- Intel QuickData Technology: DMA engine that enhances
data acceleration and lowers CPU usage
-- Direct Cache Access (DCA) to avoid cache misses
-- MSI-X support to minimize the overhead of interrupts
allowing load-balancing between multiple cores/CPUs
-- Tx/Rx IP, SCTP, TCP and UDP checksum offloading
capabilities (IPv4, IPv6)
-- Receive and Transmit Side Scaling for Windows
environments and Scalable I/O for Linux environments
• Virtualization Features
-- Supports virtualization features such as VMDq,
next-generation VMDq (64 queues per port) and
PC-SIG SR-IOV implementation
-- IPv6 Offloading
-- Advanced Packet Filtering
-- VLAN support to allow creation of multiple VLAN segments
Manageability Features:
-- Preboot eXecution Environment (PXE) support
Simple Network Management Protocol (SNMP) and Remote
Network Monitoring (RMON) statistics counters
-- iSCSI remote boot
OS Support:
-- Windows® Server 2012 (x64 edition)
-- Windows® 8 (x64 edition and 32-bit)
-- Windows® Server 2008 R2 (x64 edition and 64-bit)
-- Windows® Server 2008 (x64 edition, 64-bit, and 32-bit)
-- Windows® 7 (x64 edition and 32-bit)
-- Windows® Vista (x64 edition and 32-bit)
-- Windows® Server 2003 (x64 edition, 64-bit, and 32-bit)
-- VMWare
-- RedHat EL, SuSe SLES
-- FreeBSD
Cables Support:
-- SFP+ direct attached twin axial cables, up to 7 meters
-- LC-LC fiber-optic cables (optional SFP+ transceiver is required)
Operating Conditions:
-- Operating temperature: 0°C to 55°C
Physical Dimensions:
-- Card PCB dimensions (without end brackets):
10.04” (25.5cm) x 0.78” (2.0cm) (LxW)
Optional Accessories
-- AOC-E10GSFPSR: SFP+ transceiver module for short range fiber cables
(up to 300m)
-- AOC-E10GSFPLR: SFP+ transceiver module for long range fiber cables
(up to 3000m)
-- AOC-TSR-FS: SFP+ transceiver module for short range fiber cables (up to
300m)
-- AOC-GBIC-FSR2: SFP+ transceiver module for short range fiber cables
(up to 300m), single speed (10Gb)
-- CBL-0347L: 39.37” (100cm) 10GbE SFP+ to SFP+, Twinax copper cable
-- CBL-0456L: 78.74” (200cm) 10GbE SFP+ to SFP+, Twinax copper cable
-- CBL-0348L: 118.11” (300cm) 10GbE SFP+ to SFP+, Twinax copper cable
-- CBL-0349L: 196.85” (500cm) 10GbE SFP+ to SFP+, Twinax copper cable
Compliance/Environmental
• RoHS Compliant 6/6, Pb Free
RoHS
compliant
Supported Platforms
-- Supermicro TwinPro² only
Please note that this product is only available as an integrated solution with Supermicro server systems
For the most current product information, visit:
www.supermicro.com