AOC-CTG-I2S Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – Compact and Powerful Dual-port 10 Gigabit Ethernet Adapter

AOC-CTG-i2S
Compact and Powerful Dual-port 10 Gigabit Ethernet Adapter
The AOC-CTG-i2S 10 Gigabit Ethernet Adapter is the most flexible and scalable Ethernet adapter for today’s demanding data
center environments. Based on the Intel® 10GbE network controller 82599ES, the AOC-CTG-i2S addresses the demanding
needs of the next-generation data center by providing features for virtualization, flexibility for LAN and SAN networking, and
proven reliable performance. The AOC-CTG-i2S is designed in a small microLP form factor to fit Supermicro MicroCloud and
Twin server systems.
Key Features
• Dual SFP+ Connectors
• MicroLP Form Factor
• PCI Express 2.0 (up to 5GT/s)
• Intel® QuickData Technology
• VMDq, Next-Generation VMDq, and
• PC-SIG SR-IOV for Virtualized Environments
• Load Balancing on Multiple CPUs
• iSCSI Remote Boot Support
• Fibre Channel over Ethernet (FCoE) Support
• Support for most Network Operating Systems (NOSs)
• Supports both DAC Twin Axial and LC Fiber-Optic Cables
• RoHS compliant 6/6
Specifications
• General:
–– Intel® 82599ES 10GbE controller
–– Compact size microLP form factor
–– Dual SFP+ and dual USB 2.0 ports
–– PCI-E x8 2.0 (5GT/s)
–– Load balancing on multiple CPUs
–– iSCSI remote boot support
–– Fibre Channel over Ethernet (FCoE) Support
–– Intel® PROSet Utility for Windows® Device Manager
• I/O Features:
–– Intel® QuickData Technology: DMA engine that enhances data
acceleration and lowers CPU usage
–– Direct Cache Access (DCA) to avoid cache misses
–– MSI-X support to minimize the overhead of interrupts
allowing load-balancing between multiple cores/CPUs
–– Tx/Rx IP, SCTP, TCP and UDP checksum offloading capabilities (IPv4,
IPv6)
–– Receive and Transmit Side Scaling for Windows environments and
Scalable I/O for Linux environments
• Virtualization Features:
–– Supports virtualization features such as VMDq,
Next-generation VMDq (64 queues per port) and PC-SIG SR-IOV
implementation
–– IPv6 Offloading
–– Advanced Packet Filtering
–– VLAN support to allow creation of multiple VLAN segments
• Manageability Features:
–– Preboot eXecution Environment (PXE) support
–– Simple Network Management Protocol (SNMP) and Remote
–– Network Monitoring (RMON) statistics counters
–– iSCSI remote boot
• OS Support:
–– Windows® 7, 8, Server 2003, Server 2008, Server 2008 R2, Server 2012,
Vista
–– RedHat EL, SuSe SLES
–– FreeBSD
–– VMWare
• Cables Support:
–– SFP+ direct attached twin axial cables, up to 7 meters
–– LC-LC fiber-optic cables (optional SFP+ transceiver is required)
• Operating Conditions:
–– Operating temperature: 0°C to 55°C
• Physical Dimensions:
–– Card PCB dimensions (without end brackets):
–– 12.32cm (4.85in) x 3.90cm (1.54in) (LxW)
• Power Consumption:
–– About 8W (typical)
• Optional Accessories
-- AOC-E10GSFPSR: SFP+ transceiver module for short range fiber cables
(up to 300m)
-- AOC-E10GSFPLR: SFP+ transceiver module for long range fiber cables
(up to 3000m)
-- AOC-TSR-FS: SFP+ transceiver module for short range fiber cables (up to
300m)
-- AOC-GBIC-FSR2: SFP+ transceiver module for short range fiber cables
(up to 300m), single speed (10Gb)
-- CBL-0347L: 39.37” (100cm) 10GbE SFP+ to SFP+, Twinax copper cable
-- CBL-0456L: 78.74” (200cm) 10GbE SFP+ to SFP+, Twinax copper cable
-- CBL-0348L: 118.11” (300cm) 10GbE SFP+ to SFP+, Twinax copper cable
-- CBL-0349L: 196.85” (500cm) 10GbE SFP+ to SFP+, Twinax copper cable
Compliance/Environmental
• RoHS Compliant 6/6, Pb Free
RoHS
compliant
Supported Platforms
–– Supermicro Twin Server and MicroCloud Systems with microLP
expansion slot (See MicroLP Compatibility Matrix online )
http://www.supermicro.com/support/resources/aoc/microLP_
compatibility.cfm
Please note that this product is only available as an integrated solution with Supermicro server systems
For the most current product information, visit: http://www.supermicro.com/products/nfo/networking.cfm#adapter
www.supermicro.com