English
Language : 

AOC-CTG-I1S Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – Compact and Powerful 10 Gigabit Ethernet Adapter
AOC-CTG-i1S
Compact and Powerful 10 Gigabit Ethernet Adapter
The AOC-CTG-i1S 10 Gigabit Ethernet Adapter is the most flexible and scalable Ethernet adapter for today’s demanding data
center environments. Based on the Intel® 10GbE network controller 82599EN, the AOC-CTG-i1S addresses the demanding
needs of the next-generation data center by providing features for virtualization, flexibility for LAN and SAN networking,
and proven reliable performance. The AOC-CTG-i1S is designed in a small microLP form factor to fit Supermicro Twin server
systems.
Key Features
• Single SFP+ Connector
• MicroLP Form Factor
• PCI Express 2.0 (up to 5GT/s)
• Intel® QuickData Technology
• VMDq, Next-Generation VMDq, and
• PC-SIG SR-IOV for Virtualized Environments
• Load Balancing on Multiple CPUs
• iSCSI Remote Boot Support
• Fibre Channel over Ethernet (FCoE) Support
• Support for most Network Operating Systems (NOSs)
• Support both DAC Twin Axial and LC Fiber-Optic Cables
• RoHS compliant 6/6
Specifications
• General
-- Intel® 82599EN 10GbE controller
-- Compact size microLP form factor
-- Single SFP+ port and dual USB 2.0 ports
-- PCI-E x8 2.0 (5GT/s)
-- Load balancing on multiple CPUs
-- iSCSI remote boot support
-- Fibre Channel over Ethernet (FCoE) Support
-- Intel® PROSet Utility for Windows® Device Manager
--
• I/O Features:
-- Intel QuickData Technology: DMA engine that enhances
-- data acceleration and lowers CPU usage
-- Direct Cache Access (DCA) to avoid cache misses
-- MSI-X support to minimize the overhead of interrupts
-- allowing load-balancing between multiple cores/CPUs
-- Tx/Rx IP, SCTP, TCP and UDP checksum offloading
-- capabilities (IPv4, IPv6)
-- Receive and Transmit Side Scaling for Windows
-- environments and Scalable I/O for Linux environments
• Virtualization Features
-- Supports virtualization features such as VMDq,
-- Next-generation VMDq (64 queues per port) and
-- PC-SIG SR-IOV implementation
-- IPv6 Offloading
-- Advanced Packet Filtering
-- VLAN support to allow creation of multiple VLAN segments
Manageability Features:
-- Preboot eXecution Environment (PXE) support
-- Simple Network Management Protocol (SNMP) and Remote
-- Network Monitoring (RMON) statistics counters
-- iSCSI remote boot
Compliance/Environmental
• RoHS Compliant 6/6, Pb Free
RoHS
compliant
OS Support:
-- Windows® 7, 2003, 2008, 2008 R2, Vista
-- RedHat EL, SuSe SLES
-- FreeBSD
-- VMWare
Cables Support:
-- SFP+ direct attached twin axial cables, up to 7 meters
-- LC-LC fiber cables (optional SFP+ transceiver is required)
Operating Conditions:
-- Operating temperature: 0°C to 55°C
Physical Dimensions:
-- Card PCB dimensions (without end brackets):
-- 12.32cm (4.85in) x 3.90cm (1.54in) (LxW)
Optional Accessories
- AOC-E10GSFPSR: SFP+ transceiver module for short range fiber cables
(up to 300m)
- AOC-E10GSFPLR: SFP+ transceiver module for long range fiber cables (up
to 3000m)
- AOC-TSR-FS: SFP+ transceiver module for short range fiber cables (up to
300m)
- AOC-GBIC-FSR2: SFP+ transceiver module for short range fiber cables (up
to 300m), single speed (10Gb)
- CBL-0347L: 39.37” (100cm) 10GbE SFP+ to SFP+, Twinax copper cable
- CBL-0456L: 78.74” (200cm) 10GbE SFP+ to SFP+, Twinax copper cable
- CBL-0348L: 118.11” (300cm) 10GbE SFP+ to SFP+, Twinax copper cable
- CBL-0349L: 196.85” (500cm) 10GbE SFP+ to SFP+, Twinax copper cable
Supported Platforms
-- Supermicro Twin Server and MicroCloud Systems with microLP expansion slot (See MicroLP Compatibility Matrix online)
http://www.supermicro.com/support/resources/aoc/microLP_compatibility.cfm
Please note that this product is only available as an integrated solution with Supermicro server systems
For the most current product information, visit:
www.supermicro.com