ANTDB1HDPXXX Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Product Description

ANT-DB1-HDP-xxx
Data Sheet
Product Description
The HDP Series is a compact, center-fed antenna
that achieves efficient operation at any or all three
frequency bands. Its durable, unobtrusive housing
attaches permanently with integral adhesive to flat,
non-conductive surfaces such as windows, drywall,
ceiling tiles, plastic, etc. The antenna is supplied
with 9.8 feet (3 m) of RG-174 cable and can be
terminated in a TNC, standard SMA or FCC Part 15
compliant RP-SMA connector.
12.1 mm
(0.48")
Features
• Tri-band (824–960MHz, 1.71–1.99GHz and
2.401–2.483GHz)
• Center-fed from the side
• Surface-mount
• Low VSWR
• Excellent performance
• Omni-directional pattern
• Fully weatherized, durable & unobtrusive
• TNC, SMA or RP-SMA connector
Electrical Specifications
Recm. Freq. Range: Band 1: 824–960MHz
Band 2: 1.71–1.99GHz
Band 3: 2.40–2.48GHz
Wavelength: ½-wave
VSWR: Band 1: ≤1.5 typ. at center
Band 2: ≤1.9 typ. at center
Band 3: ≤1.9 typ. at center
Peak Gain:
Band 1: 0.2dBi
Band 2: –3.3dBi
Band 3: 0dBi
Impedance: 50-ohms
Connector:
TNC, SMA or RP-SMA
Cable:
9.8' (3 m) RG-174 coax
Oper. Temp. Range: –40°C to +80°C
Ordering Information
ANT-DB1-HDP-TNC (with TNC connector)
ANT-DB1-HDP-SMA (with SMA connector)
ANT-DB1-HDP-RPS (with RPS connector)
by
132.3 mm
(5.23")
20.0 mm
(0.79")
14.0 mm
(0.55")
TNC
connector
7.9 mm
(0.31")
SMA,
RP-SMA
connector
–1–
Revised 12/4/13