ANT-916-SP Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – Suitable for hand- or reflow-assembly

Product Dimensions
0.54”
(13.7)
916-SP2
1.10”
(27.94)
0.06”
(1.5)
0.20”
(5.1)
Recommended Footprint
0.20”
(5.1)
0.10”
(2.5)
0.08”
(2.0)
ANT-916-SP DATA SHEET
Description
916-SP2
The Splatch uses a grounded-line
technique to achieve outstanding
performance from a tiny surface-
mount element. This unique antenna
is designed for hand- or reflow-
mounting directly to a product’s circuit board. Its low cost makes
it ideal for volume applications. Unlike many compact antennas,
the Splatch exhibits good proximity performance, making it an
appropriate choice for handheld applications such as remote
controls, pagers, and alert devices.
Features
• Very low cost
• Ultra-compact package
• Direct PCB attachment
• Ideal for concealed / internal mounting
• Perfect for compact portable devices
• Suitable for hand- or reflow-assembly
• Resistant to proximity effects
Electrical Specifications
• Center Freq.
• Bandwidth
• Wavelength
• VSWR
• Impedance
• Connection
916MHz
30MHz
1/4-wave
<1.9 typ. at center
50 ohms
Surface-mount
Electrical specifications and plots measured on 1.50” x 3.30” reference ground plane
Ordering Information
• ANT-916-SP (supplied in tubes of 20 pieces)
Recommended Mounting
916-SP
11 GROUNDED LINE PLANAR ANTENNA
No ground plane or traces
under the antenna
PCB pads for the Splatch
Vias to ground plane
Ground plane on bottom
layer for counterpoise
50-ohm microstrip line
VSWR Graph
S11 SWR
1.328
CENTER 916.000MHz
SPAN 75.000MHz
Typical VSWR
Antenna Factor 159 Ort Lane Merlin, OR 97532 www.antennafactor.com
541-956-0931 (phone) 541-471-6251 (fax)
Rev 11-11-08