ANT-2.4-WRT-XXX Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – Adhesive or permanent mount

™
ANT-2.4-WRT-xxx DATA SHEET
Product Dimensions
0.43”
(11.0)
0.24”
(6.0)
1.28”
(32.5)
0.75”
(19.0)
Adhesive Ring
Remove protective plastic
before installation
SMA or
RP-SMA or U.FL
M11x1.0mm
Thread
Counterpoise
0.207”
(5.26)
Cable Length
8.50”
(216.0)
Description
The WRT Series antenna is ideally suited for
applications such as wireless vending, security,
traffic, or power equipment which require an
unobtrusive, tamper-resistant antenna solution.
The tiny 19 x 11mm radome installs through a
small hole on the product and is anchored by a
threaded base. An adhesive foam compression
ring is used to resist the elements. The 1/2-
wave antenna also features an integral counterpoise, which
eliminates the need for a proximity ground plane. The antenna's
coax feed is available with SMA, RP-SMA, or U.FL terminations.
Alternate coax lengths, connectors and custom colors are
available for volume OEM customers.
Features
· Low cost
· Unobtrusive
· Tamper resistant
· Integral counterpoise
· Indoor / outdoor
· Adhesive or permanent mount
Electrical Specifications
· Center Freq.
· Recommended Oper. Freq.
· Wavelength
· VSWR
· Impedance
· Connector
· Cable
2.45GHz
2.4 - 2.5GHz
1/2-wave
<1.9 typ. at center
50 ohms
RP-SMA, SMA, or U.FL
RG-174 RP-SMA & SMA
1.32mm U.FL
Electrical specifications and plots measured on 24” x 24” reference ground plane
Ordering Information
· ANT-2.4-WRT-RPS (with RP-SMA connector)
· ANT-2.4-WRT-SMA (with SMA connector)
· ANT-2.4-WRT-UFL (with U.FL connector)
VSWR Graph
S11 SWR
1.543
CENTER 2 450.000MHz
SPAN 200.000MHz
Typical VSWR
Antenna Factor 159 Ort Lane Merlin, OR 97532 www.antennafactor.com
541-956-0931 (phone) 541-471-6251 (fax)
Rev 6-3-10