ANT-2.4-OM-CM-01-N Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – Fiberglass radome construction

™
ANT-2.4-OM-CM-01-N DATA SHEET
Product Dimensions
ø1.35”
(34.3)
ø1.24”
(31.5)
25.1”
(637)
24.3”
(617)
1.63”
(41.4)
3.22”
(81.8)
0.94”
(23.8)
0.78”
(19.8)
BASE DETAIL
N Style
Connector
Description
The OM Series of gain antennas are designed to
increase the range and reliability of wireless links
while maintaining an omnidirectional pattern around
the circumference of the antenna. This characteristic
allows for greater flexibility in the placement of system
devices than is often found in typical gain antenna
soulutions. OM Series antennas also feature rugged,
weatherized construction making them well suited for
both indoor and outdoor applications. The antenna
includes complete mounting hardware for standard
masts. The standard antenna features 7dBi gain.
Higher gain versions are avaliable upon request.
*NOTE* Use of these antennas may result in TX and RX emission levels in excess of legal limits.
Features
• High gain
• Fiberglass radome construction
• Fully weatherized
• Rugged & damage-resistant
• N connector
Electrical Specifications
• Center Freq. 2.45GHz
• Bandwidth 83MHz (2400 - 2483)
• Polarization Vertical
• VSWR
≤1.5 typ. at center
• Impedance 50 ohms
• Gain
7dBi
• Beamwidth 360º horizontal, 13º vertical
• Max. Power 20W
• Connector N-style female
• Mounting
2-pc bracket with U-bolts, 1.58”-1.97”(40-50mm) mast
• Weight
3.3lbs (1.5kg)
• Wind Velocity 124mph (56m/s)
Ordering Information
• ANT-2.4-OM-CM-01-N
Visit connectorcity.com for cable assemblies
VSWR Graph
S11 SWR
1.107
Mounting Hardware
(Included)
CENTER 2450.000MHz
SPAN 200.000MHz
Typical VSWR
Antenna Factor 159 Ort Lane Merlin, OR 97532 www.antennafactor.com
541-956-0931 (phone) 541-471-6251 (fax)
Rev 4-9-10