|
AE775W8-4S Datasheet, PDF (1/17 Pages) List of Unclassifed Manufacturers – Features and Application | |||
|
MIL-DTL-26482
Features and Application
Series 2
Features and Application
MIL-DTL-26482 Series 2, bayonet coupling, rear-removable
crimp contact connectors were designed as an upgrade to
MIL-DTL-26482 Series 1. Series 2 connectors are inter-
mountable and interchangeable with both solder and
front-release crimp Series 1. They are also identical to the
inactivated MIL-DTL- 83723 Series I connectors.
Series 2 connectors are widely used on commercial, military
and aerospace systems requiring general-purpose, miniature
cylindrical bayonet coupling connectors.
This family of connectors is offered in 4 receptacle-mounting
styles. They include narrow ï¬ange wall mounting receptacles,
wide ï¬ange wall mounting receptacles, cable connecting
receptacles and jam nut mounting receptacles which incorpo-
rate âOâ ring seals, designed for rear panel âDâ hole mounting.
Plugs are available in two designs, with and without RFI
grounding.
Thirty-three insert arrangements per MIL-STD-1669 are
tooled and qualiï¬ed to MIL-DTL-26482 Series 2, utilizing
3 to 61 M39029 contacts. Contacts come in sizes 20, 16 and
12, terminating wire sizes from 24 to 12 gauge.
These connectors are available in wide range of shell
materials and ï¬nishes. Aluminum shells are offered in
electroless nickel, olive drab cadmium and black anodic.
Other ï¬nishes such as zinc nickel are available upon request
to commercial callouts only. In addition, we offer passivated
stainless steel shells with standard environment-resisting
inserts (commercial callouts only), and for highly corrosive
environments, nickel-aluminum-bronze shells with standard
environment-resisting inserts (commercial callouts only).
Universal I/R Tool â A single, expendable plastic tool is used
for both insertion and removal of contacts.
Insert Polarization â Alternate insert clocking positions aid
in mating of adjacent connectors having identical insert
arrangement.
Closed-Entry Socket Insert â Hard dielectric socket face
has lead-in chamfers for positive alignment of pins (even
partially bent within pre-established limits) with sockets.
Interfacial Pin Insert Seal â Raised moisture barriers
around each pin, which mate into lead-in chamfers of hard
face socket insert, provide individual contact sealing.
Interfacial seal is never touched by service tools.
Elastomer Wire Sealing Grommet â Sealing over a wide
range of wire diameters is assured by a triple wire seal in
each cavity at the rear of the connector.
Superior Contact Stability â Rear release crimp contact
system features a stamped beryllium-copper retaining clip
captivated by molded-in shoulders of each contact cavity in
the insulator. A rear-inserted M81969 plastic tool expands
the tines beyond the shoulder, releasing the contact.
www.conesys.com
â 69 â
sales@aero-electric.com
|
▷ |