ACL-8316 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – ISA DAQ/DIO Cards

ACL-8316L/8312L
16-CH 16/12-Bit 100 kS/s Multi-Function DAQ Cards
• Up to 16-bit A/D resolution
• Up to 100 kS/s sampling rate
• 16-CH single-ended or 8-CH differential inputs
• DMA transfer for analog inputs
• Programmable gains
ACL-8216
16-CH 16-Bit 100 kS/s Multi-Function DAQ Card
• 16-bit A/D resolution
• Up to 100 kS/s sampling rate
• 16-CH single-ended or 8-CH differential inputs
• DMA for analog inputs
• Programmable gains
ACL-8112 Series
16-CH 12-Bit 100 kS/s Multi-Function DAQ Cards
• 12-bit A/D resolution
• Up to 100 kS/s sampling rate
• 16-CH single-ended or 8-CH differential inputs
• DMA for analog inputs
• Programmable gains
ACL-8111
8-CH 12-Bit 50 kS/s Low-Cost Multi-Function DAQ Card
• 12-bit A/D resolution
• Up to 50 kS/s sampling rate
• 8-CH single-ended inputs
• Programmable IRQ level for A/D data transfer
• Programmable gains
ACL-8113A
32-CH 12-Bit 30 kS/s Isolated Analog Input Card
• 12-bit A/D resolution
• Up to 30 kS/s sampling rate
• 32-CH single-ended inputs
• Programmable gains
• 2500 VRMS optical isolation
ACL-6126
6-CH 12-Bit Analog Output Card
• 12-bit D/A resolution
•6-CH voltage outputs
•6-CH current outputs
•Bipolar or unipolar analog output ranges
• 16-CH TTL digital inputs & 16-CH TTL digital
outputs
ACL-6128A
2-CH 12-Bit Isolated Analog Output Card
• 2-CH 12-bit multiplying analog outputs
• Bipolar or unipolar voltage output ranges
• Unipolar current output ranges
• 2500 VRMS optical isolation
• Compact, half-size PCB Programmable gains
ISA DAQ/DIO Cards
1
Software &
Utilities
ACL-7130
2
16-CH Isolated DI &16-CH Isolated DO Card
DAQ
• 16-CH isolated digital inputs and 16-CH isolated
3 ^{digital outputs}
•2500 VRMS optical isolation
• Sink current up to 500 mA on each isolated output
• 16-CH TTL digital inputs and 16-CH TTL digital outputs
• Two external interrupt sources
PXI
ACL-7125
8-CH Relay Outputs & 8-CH Isolated DI Card
• 4-CH SPDT (Form C) and 4-CH SPST (Form A) relays
• Non-latching relays
• Onboard relay driving circuits
• Onboard LED indicators for relay status
• 8-CH isolated digital inputs
ACL-7225
16-CH Relay Outputs & 16-CH Isolated DI Card
• 8-CH SPDT (Form C) & 8-CH SPST(Form A) relays
• Non-latching relays
• Onboard LED indicators for relay status
• Onboard relay driving circuits
• 16-CH isolated digital inputs
ACL-7122
Opto-22 Compatible 144-CH Card
ACL-7120A/6
• High-density 144-CH digital inputs/outputs
• TTL/DTL compatible digital I/O channels
• Direct interface with OPTO-22 compatible
I/Omodules
• Buffered circuits for high driving capacity
• Programmable interrupt handling
32-CH DIO & Timer/Counter Card
• 32-CH TTL digital inputs and 32-CH TTL digital
outputs
• High output driving capacity
• 3 independent programmable 16-bit down counters
• One 16-bit event counter for interrupt generation
• One cascaded 32-bit timer with a 4 MHz timebase
ACL-8454/12
8-CH 16-Bit Counters, 2-CH 32-Bit Timer & Digital I/O Card
• 8-CH timers/counters
• 2-CH cascaded 32-bit timer with 1 MHz base clock
• Onboard multiple base clocks ranging from 100 kHz to 2 MHz
• External gate control and clock inputs for each counter
• 8-CH TTL digital outputs and up to 16-CH TTL digital inputs
4
Modular
Instruments
5
GPIB & Bus
Expansion
6
Motion
Control
7
Real-time
Distributed
I/O
8
PAC
9
Remote I/O
10
Communi-
cations
11
Vision
12
Fanless
Embedded
Computers
13
cPCI &
Industrial
Computers
www.adlinktech.com ^2-58