AB6M-V1-R Datasheet, PDF (1/14 Pages) List of Unclassifed Manufacturers – A6 Series Miniature Switches and Pilot Devices 16mm

Switches & Pilot Devices
16mm A6
A6 Series — Miniature Switches and Pilot Devices: 16mm
Key features:
• 16mm (5/8”) mounting hole
• LED illumination
• Compact design saves space
• Momentary, Maintained, Selectors, and E-Stops
• Gold-clad Silver contacts for reliable low level switching
• Snap action contacts
• IP40 (dustproof) or IP65 (oiltight) versions
UL Recognized
File No.E55996
CSA Certified
File No. LR21451
R
Degree of Protection
Contact Configuration
Maximum Voltage
Thermal Current
Minimum Applicable Load
Contact Material
Terminal Style
Operating Temperature
Operating Humidity
Contact Resistance
Insulation Resistance
Vibration Resistance
Shock Resistance
Electrical Life
Mechanical Life
Dielectric Strength
Soldering Temperature
Operating Voltage
AC (50/60Hz)
Resistive
Inductive
Resistive
DC
Inductive
Rated Voltage/Current
IP40: Dustproof
IP65 Watertight/Oiltight
SPDT, DPDT
250V AC/DC
3A
5V AC/DC, 1mA
Gold-clad silver
.110” Solder/ Quick Connect
-25º to +55ºC (no freezing)
45 to 85% RH
50mΩ maximum (initial value)
100MΩ minimum (500V DC megger)
10 to 55Hz, amplitude 1.5mm p-p
Damage limits: 500m/sec² (approx. 50G) Operating extremes: 200m/sec² (approx. 20G)
100,000 operations minimum (at full rated load)
Maintained: 100,000 operations minimum
Momentary: 1,000,000 operations minimum
Selector/Keylock: 250,000 operations minimum
Switch Unit: 2,000V AC, 1 min. between live/dead part and terminals of different poles;
1,000V AC, 1 minute between terminals of the same pole;
1,500V AC, 1 minute between contact and lamp terminals.
Illumination Unit: 2,000V AC, 1 min. between live part/ground
20W/5 seconds or 260ºC/3 seconds
24V
120V
240V
—
1.0A
0.5A
—
0.7A
0.5A
1.0A
0.2A
—
0.7A
0.1A
—
5V DC ±5%
6V AC/DC (±10%)
12V AC/DC (±10%)
24V AC/DC (±10%)
AC: A, R, W, Y: 8mA
8mA
G, S: 7mA
DC: A, R, W, Y: 6mA
AC: 9mA
DC: 8mA
AC: 9mA
DC: 8mA
G, S: 5mA
1. AC Inductive Load, PF = 0.6 – 0.7; DC Inductive Load, L/R = 7ms.
2. LED lamp contains a built-in current limiting resistor and a protection diode.
3. LED’s don’t “burn out.” Luminance is reduced to 50% of initial intensity after being lit for 50,000 hours continuously.
USA: 800-262-IDEC Canada: 888-317-IDEC
457