9WL0912P4J001 Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – Splash Proof Fan San Ace 92W

92
Splash Proof Fan
9WL type
■ Features
Splash Proof and Dust Resistant
IP68^*1 protection rating water and dust resistance.
Longest-Lasting Lifespan
These fans have an expected lifespan of 180,000 hours
(approximately 20 years), about 4.5 times that of our conventional
splash proof fan,^*2 making them ideal for equipment that must operate
without maintenance for extended periods.
High Air Flow and High Static Pressure
Maximum air flow increased by approximately 1.2 times and
maximum static pressure increased by approximately 1.5 times
compared with our conventional splash proof fan.^*2
Low Power Consumption
The power consumption is approximately 21% lower than that of
our conventional splash proof fan.^*3
*1: Based on testing procedure for IEC (International Electrotechnical Commission)
specification IEC 60529.
*2: Specification of Model No. 9WL0924PJ001. Our conventional splash proof fan is
92 x 92 x 25 mm “San Ace 92W”, Model No. 9WP0924G401.
*3: Specification of Model No. 9WL0912P4G001. At equivalent air flow performance.
Our conventional splash proof fan is 92 x 92 x 25 mm “San Ace 92W”,
Model No. 9WP0924G401.
92×92×25mm
■ Specifications
The following nos. have PWM controls, pulse sensors.
Model No.
9WL0912P4J001
Rated Voltage
Operating
Voltage Range
[V]
[V]
PWM
Duty Cycle
Rated Current
Rated Input
Rated Speed
Max. Air Flow MAX. Static Pressure
SPL
Operating
Temperature
[%] ^(Note1,2)
[A]
[W]
[min^-1] [m³/min] [CFM] [Pa] [inchH2O] [dB(A)]
[℃]
100
0.42
5.04
5,000
2.2
77.7 105
0.42
44
Expected
Life
[h]
20
0.04
0.48
1,200
0.52 18.4
6.04 0.024 11
9WL0912P4G001
9WL0912P4S001
100
20
12
10.8 to 13.2
100
30
0.30
3.60
4,400
1.93 68.2 81
0.33
40
0.04
0.48
1,000
0.43 15.1
4.18 0.016
8
0.22
2.64
3,850
1.69 59.7 62.1 0.25
37
0.04
0.48
1,400
0.61 21.5
8.21 0.032 13
9WL0912P4H001
100
0.15
1.80
3,150
1.38 48.7 41.6 0.17
32
－20 to ＋70 180,000
30
0.04
0.48
1,100
0.48 16.9
5.07 0.020
9
9WL0924P4J001
100
0.21
5.04
5,000
2.2
77.7 105
0.42
44
20
0.02
0.48
1,100
0.48 16.9
5.07 0.020
9
9WL0924P4S001
100
24
21.6 to 26.4
30
0.11
2.64
3,850
1.69 59.7 62.1 0.25
37
0.02
0.48
1,300
0.57 20.1
7.08 0.028 12
100
9WL0924P4H001
30
Note1: PWM Frequency: 25 kHz
Note2: Fans do not rotate when PWM duty cycle is 0%.
0.07
1.68
3,150
1.38 48.7 41.6 0.17
32
0.02
0.48
1,000
0.43 15.1
4.18 0.016
8
Available options: Without Sensor Pulse Sensor Lock Sensor
■ Common Specifications
□ Material ･･････････････････････････ Frame: Aluminum (Black coating), Impeller: Plastics (Flammability: UL94V-1)
□ Expected Life ･････････････････････ Refer to specifications
(L10: Survival rate: 90% at 60 ℃, rated voltage, and continuously run in a free air state)
□ Motor Protection System ･･････････ Current blocking function and reverse polarity protection
□ Dielectric Strength ････････････････ 50 / 60 Hz, 500 VAC, 1 minute (between lead conductor and frame)
□ Sound Pressure Level (SPL) ････････ Expressed as the value at 1 m from air inlet side
□ Operating Temperature ････････････ Refer to specifications (Non-condensing)
□ Storage Temperature ･･････････････ －30 ℃ to ＋70 ℃ (Non-condensing)
□ Lead Wire ････････････････････････ ＋Red　○ーBlack　Sensor: Yellow Control: Brown
□ Mass ･････････････････････････････ Approx. 170 g