9WL0812P4J001 Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – Splash Proof Fan San Ace 80W

80
Splash Proof Fan
9WL type
■ Features
Splash Proof and Dust Resistant
IP68^*1 protection rating water and dust resistance.
Longest-Lasting Lifespan
These fans have an expected lifespan of 180,000 hours
(approximately 20 years), about 3 times that of our conventional
splash proof fan,^*2 making them ideal for equipment that must operate
without maintenance for extended periods.
High Air Flow and High Static Pressure
Maximum air flow increased by approximately 1.3 times and
maximum static pressure increased by approximately 2.2 times
compared with our conventional splash proof fan.^*3
Low Power Consumption
The power consumption is approximately 21% lower than that of
our conventional splash proof fan.^*4
*1: Based on testing procedure for IEC (International Electrotechnical Commission)
specification IEC 60529.
*2: Specification of Model No. 9WL0812P4J001. Our conventional splash proof fan is
80 x 80 x 25 mm “San Ace 80W”, Model No. 9WP0812H401.
*3: Specification of Model No. 9WL0812P4J001. Our conventional splash proof fan is
80 x 80 x 25 mm “San Ace 80W”, Model No. 9WP0812G401.
*4: Specification of Model No. 9WL0812P4G001. At equivalent air flow performance.
Our conventional splash proof fan is 80 x 80 x 25 mm “San Ace 80W”,
Model No. 9WP0812G401.
80×80×25mm
■ Specifications
The following nos. have PWM controls, pulse sensors.
Model No.
9WL0812P4J001
Rated Voltage
Operating
Voltage Range
[V]
[V]
PWM
Duty Cycle
Rated Current
Rated Input
Rated Speed
Max. Air Flow MAX. Static Pressure
SPL
Operating Expected
Temperature Life
[%] ^{(Note1, 2)}
[A]
[W]
[min^-1] [m³/min] [CFM] [Pa] [inchH2O] [dB(A)]
[℃]
[h]
100
0.6
7.2
7,400
2.07 73.0 177
0.71
49
20
0.06
0.72
1,800
0.50 17.6 10.4 0.04
16
9WL0812P4G001
100
12
10.8 to 13.2
25
0.30
3.60
5,500
1.54 54.3 98
0.39
43
0.05
0.60
1,400
0.39 13.7
6.3 0.02
14
9WL0812P4H001
9WL0824P4J001
100
0.12
1.44
3,700
1.03 36.3 44
0.17
31
25
0.04
0.48
1,100
0.30 10.5
3.9 0.01
13
－20 to ＋70 180,000
100
0.28
6.72
7,400
2.07 73.0 177
0.71
49
20
0.05
1.20
2,400
0.67 23.6 18.6 0.07
22
9WL0824P4G001
100
24
21.6 to 26.4
20
0.14
3.36
5,500
1.54 54.3 98
0.39
43
0.02
0.48
1,200
0.33 11.6
4.6 0.01
13
9WL0824P4H001
100
0.05
1.2
3,700
1.03 36.3 44
0.17
31
30
0.02
0.48
1,100
0.30 10.5
3.9 0.01
13
Note1: PWM Frequency : 25kHz
Note2: Fans do not rotate when PWM duty cycle is 0%.
Available options: Without Sensor Pulse Sensor
Please inquire as the availability of these functions depends on the model: Lock Sensor
■ Common Specifications
□ Material ･･････････････････････････ Frame: Aluminum (Black coating), Impeller: Plastics (Flammability: UL94V-1)
□ Expected Life ･････････････････････ Refer to specifications
(L10: Survival rate: 90% at 60 ℃, rated voltage, and continuously run in a free air state)
□ Motor Protection System ･･････････ Current blocking function and reverse polarity protection
□ Dielectric Strength ････････････････ 50 / 60 Hz, 500 VAC, 1 minute (between lead conductor and frame)
□ Sound Pressure Level (SPL) ････････ Expressed as the value at 1 m from air inlet side
□ Operating Temperature ････････････ Refer to specifications (Non-condensing)
□ Storage Temperature ･･････････････ －30 ℃ to ＋70 ℃ (Non-condensing)
□ Lead Wire ････････････････････････ ＋Red　○ーBlack　Sensor: Yellow Control: Brown
□ Mass ･････････････････････････････ Approx. 150 g