99002 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – Low Voltage AC LED Electronic Transformer

Low Voltage AC LED Electronic Transformer
AC LED Technology by Lynk Labs
Compatible with Phase-cut Dimmers
Specifications
Input Voltage:
120Vac @ 50/60 Hz
Drive Voltage:
12V Nom. @ 50/60 Hz
Minimum Load:
0.5W
Operating Frequency: 25KHz inverter square wave,
100/120 Hz sinewave envelope
Power Factor:
> 0.95
THD:
<50%
Dimmable:
100% to 0%
Output Protection: Short Circuit
Input Leads:
18AWG stranded (Black/White)
105ºC, stripped ⅜”, tinned
Output Leads:
18AWG stranded (Red)
105ºC, stripped ⅜”, tinned
Enclosure:
Aluminum
Max Case Temp:
15W: 90ºC, 30/60W: 85ºC
Min Starting Temp: -30ºC
Operating Humidity: 95% relative humidity, non-cond.
Weight:
68gm (0.15 lb)
Safety Listing:
Class P Type 1 outdoor, UL Class 2
Sound Rating:
A+
Patented low voltage power supplies drive AC LEDs at high frequency
for flicker-free operation. Designed for LED loads.
Smaller and lower cost than DC LED drivers, yet output more power.
Features
• Compatible with most existing leading edge
or trailing edge phase cut AC Dimmers
• High Reliability
• High Power Factor
• Lightweight, Compact Design
• Class P Type 1 Outdoor
• Moisture Resistant
• No Audible Noise
Applications
• All 12V AC applications
• MR16 lamps
• Under Cabinet Lights
• General Indoor Lighting
• Garden Lights
• Display Lights
• Retail track lights
• White goods interior lights
12V AC LED Driver
Model Number
Output
Power (W)
99002
15
99004
30
99006
60
Input Voltage
(Vac)
120
120
120
Output Voltage (±
0.3 Vac)
11.7
11.7
11.7
2.20 [55.83]
6.0 [152]
INPUT
White
Black
0.125 [3.2]
OUTPUT
Red
Red
WIRE SPECS:
AC Input: #18AWG stranded
AC Output: #18AWG stranded
Electronic Short-Circuit Protection
These low-voltage transformers employ Electronic
Short Circuit and Overload Protection. The ESP sensing
circuit instantly shuts down the output before any of the
components are stressed if a short circuit or overload is
detected. Automatically resets when the fault is corrected.
Soft Start Circuitry
These low-voltage transformers utilize a soft start circuitry
to maximize life. The soft start circuit ramps up the drive
voltage slowly minimizing thermal stress in the LED.
Specifications subject to change without notice. Trademarks are property of their respective owners.
Rev 7-14-14
Thomas Research Products • 1215 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com