9130B Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – Three independent and electrically isolated outputs

Data Sheet
Programmable Triple Output DC Power Supplies
9130B Series
The 9130B Series triple output linear
programmable DC power supplies feature isolated
outputs that can be adjusted independently or
combined in series or parallel to output higher
voltage or current. Additionally, these supplies
can operate in tracking mode with
user-configurable ratios between channels.
The front panel keys and rotary knob with
convenient cursors let users quickly set voltage
and current values. Up to 36 different instrument
settings can be saved and recalled. The power-on
state of the outputs can also be configured.
For remote control, the standard USB (USBTMC-
compliant), RS232, and GPIB interfaces
supporting SCPI commands can be used to
remotely control the power supplies via a PC.
Alternatively, users can control the power supply,
execute test sequences or log measurements
using the provided PC software application. This
software also integrates with Data Dashboard for
LabVIEW apps enabling iOS, Android, or
Windows 8 compatible tablets or smartphones to
remotely monitor select measurement indicators.
These power supplies are suitable for a wide
range of applications including production
testing, telecommunications, R&D, electronic
service, and labs.
Model
Voltage
Current
9130B
0 - 30 V (Ch1 & Ch2)
0 - 5 V (Ch3)
0-3 A (Ch1, Ch2 & CH3)
9131B
0 - 30 V (Ch1 & Ch2)
0 - 5 V (Ch3)
0-6 A (Ch1 & Ch2)
0 - 3 A (Ch3)
9132B
0 - 60 V (Ch1 & Ch2)
0 - 5 V (Ch3)
0-3 A (Ch1, Ch2 & Ch3)
Features
I Three independent and electrically isolated
outputs
I Displays voltage and current settings for all
three channels simultaneously
I Low noise, linear regulation
I High programming and readback resolution of
1 mV / 1 mA
I Series and parallel modes combine channels to
increase the output voltage or current
I Tracking mode allows users to set up channels
to maintain a programmed ratio
I Fully programmable channels with Output
On/Off control
I Store and recall up to 36 instrument settings
I Remote sense
I Timer-controlled output function adjustable
from 0.1 – 99999.9 s
I Standard USB (USBTMC-compliant), RS232,
and GPIB interfaces supporting SCPI
commands for remote control
I NI certified LabVIEW driver and softpanel for
remote control, test sequence generation, and
datalogging available
I Overvoltage (OVP) and overtemperature (OTP)
protection including keylock function
I Compact 19” half-rack form factor allows for
side-by-side rack mounting of two units
Technical data subject to change
© B&K Precision Corp. 2015
www.bkprecision.com