8681 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – LED LENS CAPS

LED LENS CAPS
Designed for use with T-1 or T-1 3/4 LEDs, these Lens Caps are available in round
or square configurations. They snap-mount through the front panel for easy, light-finger pres-
sure, intsallation. The LED is inserted into the cap from behind the panel and held securely
in place.
The Lens Cap protects the LED from physical damage while guarding the components from
electrostatic discharge (ESD), up to 16KV. More economical than indicator light assemblies,
the caps feature striated lines and fresnel rings which permit up to 180 viewing angles with
either diffused or non-diffused LED’s. They provide exceptionally high contrast and visibility.
.190
[4.9]
DIA.
.150
[3.8]
.290 [7.4]
MATERIAL: Polycarbonate
Available in Red, Green, Yellow and Clear
.280 [7.1]
DIA. .220
[5.6]
.430 [10.9]
ROUND CAPS
.190
[4.9]
DIA.
.060
[1.52]
.290 [7.4]
.280 [7.1]
DIA. .070
[1.78]
.430 [10.9]
.171 [4.4] DIA.
.250 [6.4] DIA.
.171 [4.4] DIA.
.250 [6.4] DIA.
FIG. 1 T-1
FIG. 2 T-1 3/4
STANDARD HEIGHT
CAT.
FIG. LED MTG. HOLE MIN. MTG.
PANEL
NO. COLOR NO. SIZE SIZE CENTERS THICKNESS
8650 RED
8651 GREEN
8652 YELLOW
1
T-1 .171 (4.3) .250 (6.4) .031 - .062 (.79/1.57)
8653 CLEAR
8662 RED
8663 GREEN
8664 YELLOW
2 T-1 3/4 .250 (6.4)
.375 (9.5) .062 - .125 (1.57/3.18)
8665 CLEAR
FIG. 3 T-1
FIG. 4 T-1 3/4
LOW PROFILE
CAT.
NO. COLOR
8656 RED
8657 GREEN
8658 YELLOW
8659 CLEAR
8668 RED
8669 GREEN
8670 YELLOW
8671 CLEAR
FIG. LED MTG. HOLE MIN. MTG.
PANEL
NO. SIZE SIZE CENTERS THICKNESS
3 T-1 .171 (4.3) .250 (6.4) .062 - .125 (1.57/3.18)
4 T-1 3/4 .250 (6.4) .375 (9.5) .031 - .250 (.79/6.4)
(See Note)
.280 [7.1]
SQ.
.220
[5.6]
.430 [10.9]
SQUARE CAPS
.190
[4.9]
SQ.
.060
[1.52]
.290 [7.4]
.280 [7.1]
SQ.
.070
[1.78]
.430 [10.9]
.250 [6.4] SQ.
FIG. 5 T-1 3/4
STANDARD HEIGHT
CAT.
FIG. LED MTG. HOLE MIN. MTG. PANEL
NO. COLOR NO. SIZE SIZE CENTERS THICKNESS
8680 RED
8681 GREEN
8682 YELLOW
8683 CLEAR
5
.250
T-1 3/4 (6.4)
SQUARE
.375 (9.5) .062 - .125 (1.57/3.18)
.171 [4.4] DIA.
.250 [6.4] DIA.
FIG. 6 T-1
FIG. 7 T-1 3/4
LOW PROFILE
CAT.
FIG. LED MTG. HOLE MIN. MTG.
PANEL
NO. COLOR NO. SIZE SIZE CENTERS THICKNESS
8674 RED
8675 GREEN
8676 YELLOW
6
T-1 .171 (4.3) .250 (6.4) .062 - .125 (1.57/3.18)
8677 CLEAR
8686 RED
8687 GREEN
8688 YELLOW
7
8689 CLEAR
T-1 3/4 .250 (6.4) .375 (9.5) .031 - .250 (.79/6.4)
(See Note)
Note: When mounting T-1 3/4 Low Profile Caps (Fig. 4 or Fig. 7) in panels .125 (3.2) thick or less a spacer must be used. Spacer CAT. NO. 8692 MATERIAL: White Nylon .360 (9.1) O.D. × 1/4 I.D. × 1/8 Lg.
“SNAP-IN” T-1 & T-1 3/4 LED HOLDERS
Designed for use with T-1 or T-1 3/4 LED’s in .060 (1.52) - .070 (1.78) thick panels. The
holder snaps into the front panel with easy, light-finger pressure. The LED snaps into the
holder from behind the panel and is held securely in place.
90
MATERIAL: Nylon 6/6, Black
CAT. LED
MTG. HOLE
NO. SIZE A
B
C
SIZE
8309 T-1 .114 (2.9) .232 (5.9) .188 (4.8) .171 (4.3)
8310 T-1 3/4 .200 (5.0) .315 (8.0) .274 (6.9) .250 (6.4)
B
C
DIA.
.030
[0.76]
A DIA.
Tel [phone] • Fax [phone]
[phone] • [e-mail]
®
RoHS COMPLIANT ~ ISO 9001 CERTIFIED
www.keyelco.com
31-07 20th Road – Astoria, NY 11105-2017