8500 Datasheet, PDF (1/6 Pages) ITT Industries – Subminiature Pushbutton Switches

Data Sheet
DC Electronic Loads
8500 Series
2400W
600 W - 1200 W
300 W
Versatile & Economical DC Electronic
Loads
The 8500 series Programmable DC Electronic
Loads can be used for testing and evaluating a
variety of DC power sources. Their wide
operating ranges of up to 500 V and 240 A,
flexible operating modes and excellent
measurement accuracy make the 8500 series
well suited for characterizing DC Power
supplies, DC-DC Converters, batteries, fuel
cells and solar cells.
The loads can operate in CC, CV, CR or CP
mode while voltage/current or resistance/power
values are measured and displayed in real time.
Load terminals are isolated and floating. Over
temperature, over power, over voltage, over
current and reverse polarity protection will help
protect your valuable prototype and circuits.
The DC loads are easy to use. All parameters
can be set quickly and precisely from the front
panel, or programmed via USB interface.
The 8500 family offers 10 models with a wide range of ratings
Model
8500
8502
8510
8512
8514
8518
8520
8522
8524
8526
Power
300 W
300 W
600 W
600 W
1200 W
1200 W
2400 W
2400 W
5000 W
5000 W
Operating Voltage
0.1 - 120 V
0.1 - 500 V
0.1 - 120 V
0.1 - 500 V
0.1 - 120 V
0.1 - 60 V
0.1 - 120 V
0.1 - 500 V
0.1 - 60 V
0.1 - 500 V
Rated Current
30 A
15 A
120 A
30 A
240 A
240 A
240 A
120 A
240 A
120 A
When selecting a DC load, it is important to
consider not only voltage and current
requirements, but also power ratings. The power
used when testing must fall within the hatched
region for the appropriate DC load.
Some applications may require high voltage/low
current and low voltage/high current which a
single load may not be able to handle. B&K
Precision’s broad range of DC loads will allow
you to select the optimal model for your
requirements.
Rated power
Input current
Technical data subject to change
© B&K Precision Corp. 2016
www.bkprecision.com