81222 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – WESCORP ESD CELLULOSE TAPE, PAPER CORE

81227
81220
Tape is wound on paper core
RoHS Compliance Statement
None of the following materials are intentionally added in manufacturing this
product: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls
(PBB) or polybrominated diphenyl ethers (PBDE) as outlined in the Directive
2002/95/EC Article 4.1. See Desco Industries Inc. letter on-line at Desco.com.
No sulfur, surfactants or silicone based material (adhesive, film backing, release
material) is used in the manufacture of our cellulose tape.
Wescorp Tape Storage and Limited Warranty:
The user must determine the suitability for use of an ESD tape for his particular
application. For best results, tape inventory should be continually replenished. It
is recommended that rolls of tape be stored flat and rotated (flipped over to the
other side) periodically. Tapes should be stored in a dry, well ventilated room with a
reasonably consistent temperature of 68°F (20°C) and be protected from exposure
to direct sunlight. Tape should not be stored in ultraviolet sunlight, moisture, or heat.
Tape over one year old should be evaluated by the user to determine acceptability for
the user’s application.Desco Industries, Inc. recommends those tracking useful life of
product to use shipping/invoice date as Desco Industries, Inc. expressly warrants that
for a period of one (1) year from the date of purchase, our Wescorp Brand Antistatic
Tape will be free of defects in material (parts) and workmanship (labor). See details of
Limited Warranty online at Desco.com/Warranty.aspx
*Wescorp is a Desco Industries brand.
Specifications and procedures subject to change without notice
© 2010 Desco Industries Inc.
Employee Owned
ESD Cellulose Tape
For general purpose applications
• 2.4 mil (0.0024” or 0.06 mm) total thickness
• Cellulose film resistance 10E10 - 10E11 ohms per ANSI/ESD S11.11
• Rubber based adhesive absorbs moisture
• Adhesive surface resistance 10E10 - 10E11 ohms
• Temperature Range -10°C to +71°C (14°F - 160°F); meets MIL-B-81705 of
100°C for 10 minutes maximum
• Available in clear, clear with ESD symbols, and clear with ESD symbols
with yellow stripe. Marking includes ESD sensitivity symbols of Mil
STD-1285* and ANSI/ESD S8.1.
• Durable marking; symbols printed in between film and adhesive
Width - See Metric Note
Tape
0.5"
.75"
1"
2"
Core Length
ESD Clear Cellulose 81220 81221 81222 81226
1"
36 yds
81223 81224 81225
3"
72 yds
ESD Clear Cellulose with 81227 _{81228 81229 81230}
Symbols
3"
72 yds
Tape widths are nominal
metric ±0.8 mm (±1/32")
1/4"is 6 mm nominal or
1/2"is 12 mm nominalor
3/4"is 18 mm nominalor
1" is 24 mm nominal or
2" is 48 mm nominal or
0.236"
0.472"
0.709"
0.945"
1.890"
Width tolerance ±1/32"
Antistatic Tape
Imprint on Clear Cellulose
with Symbols
*Military organizations sometimes use MIL-STD-1285 for hardware marking and that
document once required the use of the “three arrows in a circle” symbol. That symbol
has been changed for consistency with industry marking to the “hand in triangle” ESD
Susceptibility symbol.”(Ref: ESD TR20.20 section 5.3.14.1)
Made in America
WESCORP* ESD CELLULOSE TAPE, PAPER CORE
DESCO WESt: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: Desco.com
PHONE [phone] FAX [phone]
DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407
PHONE [phone] FAX [phone]
DRAWING NUMBER
81220
DATE:
April
2010