7023-D-I-1000 Datasheet, PDF (1/8 Pages) List of Unclassifed Manufacturers – Wide Range LED Power Module

7021/7023 BuckPlus^TM
Wide Range LED Power Module
DATA SHEET Page 1 of 8
Product Overview
The 7021 and 7023 BuckPlus LED Power Modules are a line of true
current regulated drivers for powering LEDs. The BuckPlus line of
LED drivers are the ideal choice for powering all types of high-
brightness and high-power LED Packages and LED arrays.
The line of BuckPlus LED drivers exhibit high efficiency and require
no external current limiting resistors or additional heat sinking for
operation. A fast response current-sensing circuit makes the 7021
and 7023 ideal for applications where flashing or strobe operation of
the LED(s) is required.
A wide range of options are available including external dc analog
voltage intensity control, TTL/CMOS logic level on/off control (”E”
Version), and set-and-forget internal current limiting (”I” Version).
The standard units are fully potted in an extremely small form factor*
and are provided with a simple 7 pin SIP connection for through-hole
PCB mounting (7021) or 6” 24AWG Colored Leads (7023).
The 7021 and 7023’s built-in regulated 5V reference (E and I versions)
can provide output to power logical circuitry or microprocessor,
eliminating the need for an additional power supply on the circuit board.
Features
Typical Applications
DC input voltage up to 32V
350mA, 500mA, 700mA, or 1.0A constant current output*
Extremely small form factor* (0.83”x0.83”x0.43”)
The 7021 has a simple 7-pin SIP connection for through-hole
PCB mounting or use with an optional wiring harness (7021Hx)
The 7023 has permanently attached wires
External analog/digital intensity control (TTL compatible)
Optional external potentiometer intensity control (0-100%)
Optional on-board trim adjustment (40-110%)
Output short circuit protection up to 15 seconds
Output open circuit protection
Pulse and strobe capable (control input)
Built-in 5V reference/output to power logic circuitry or μProcessor
Solar & Landscape Lighting
Architectural Lighting
Track Lighting
Automotive & Marine Lighting
Portable Lighting & Flashlights
Point of Purchase Lighting
Desk & Reading Lamps
Signal & marker Lighting
Flashing & Strobe Lighting
Cabinet & Display Case Lighting
Sign & Channel Letters
Much More...
Pb
7-Pin SIP through-hole
PCB mounting
Optional on-board trim
adjustment (40-110%)
* - Custom units can be designed for OEM applications. Contact LUXdrive for more information.
7021
BuckPlus
with optional
wiring harness
(7021HEP)
LEDdynamics, Inc.
802.728.4533 P
802.728.3800 F
[e-mail]
www.LUXdrive.com
©2010 LUXdrive, A Division of LEDdynamics, Inc. www.LUXdrive.com.
Specifications subject to change without notice. April, 2010 - Rev 2.2
Made _{in the USA}
RoHS
C o m p lia n t
2002/95/EC