English
Language : 

700D16894-601 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Power Ring Film CapacitorsTM
Power Ring Film CapacitorsTM
SBE Part 700D16894-601
Power Ring Film Capacitor™
1600 µF, 450 Vdc
The 700D16894-601 Power Ring is a 450
Vdc, 1600 µF DC Link Capacitor with an
ESR of 98 micro-Ohms at 20 kHz and an
ESL of less than 5 nH.
Electrical Specifications
SBE Part #:
700D16894-6P0o1wer Ring Film CapEaScLi:t ors™
Less than 5 nH in a suitable
SBE Part #: 700D 16794-60 1 laminar bus structure
Capacitance/Tolerance: 1600 µF ±10%
DC Voltage Rating: 450 Vdc
TDeicelhenctircica/CloDnasttraucStiohne: eMt etallized polypropylene.
Thermal Resistance: 1.07°C/W (case side cooling only)
0.55°C/W (case and bus side
cooling only)
Single section design
Operating Temperature: -40°C to +85°C at full DC voltage
ElDecietrlieccatlrSicpeWciiftichasttiaonnsd Units 100% tested at DC
rating
Voltage:
potential of 560 Volts for
Capacitance/Tolerance: 1600 µF, t±w10o% minutes at 25°C
DC Voltage Rating:
450 VDC
Dielectric/Construction: Metallized Polypropylene film. Single section design
Voltage, Temperature De-rate voltage linearly to
De-rating:
250 Volts from +85°C to +107°C,
with respect to hotspot
temperature
Dielectric
Withstand Voltage:
Units 100% tested at a DC potential of 560 Volts for two minuSteyssatte+m25°FCault Current 10,000 Amps maximum (external
ESR vs. Frequency:
Rating:
to the capacitor)
Typical ESR vs. Frequency:
RMS Current Rating:
600
500
400
Case Side Cooling Only
Datasheet
Case and Bus Side Cooling
Datasheet
300
700D601with 20 kHz ripple current
200
Temperature rise due to capacitor losses only
Bus heat load NOT included
100
0
25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105
Case Temperature (oC)
SBE reserves the right to amend design data
At the Leading Edge of Film Capacitor Technology®