700D117912-408 Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – Power Ring Film CapacitorsTM

Power Ring Film CapacitorsTM
SBE Part 700D117912-408
Power Ring Film Capacitor™
115 µF, 1200 Vdc
The 700D117912-408 Power Ring is a
1200Vdc, 115 µF DC Link Capacitor with
an ESR of 500 micro-Ohms at 20kHz and
an ESL of less than 5nH.
Electrical Specifications
SBE Part #:
700D117912-408
Capacitance/Tolerance: 115 µF ±10%
DC Voltage Rating: 1200 Vdc
Dielectric/Construction: Metallized polypropylene.
Single section design
Dielectric Withstand: Units 100% tested at DC
potential of 1500 Volts for two
minutes at 25°C
ESL:

Less than 5 nH in a suitable
laminar bus structure
Operating Temperature: -40°C to +85°C at full
DC voltage rating
Voltage, Temperature De-rate voltage linearly to
De-rating:
800 Vdc from +85°C to +105°C

System Fault Current 4,000 Amps maximum
Rating (external to the
capacitor):
Typical ESR vs. Frequency:
Typical 700D408 ESR vs Frequency
7
6
5
4
3
2
1
0
0.01
0.1
1
10
Frequency, KHz
RMS Current Rating:
400
300
200
Case Side Cooling Only
100
Case and Bus Side Cooling
100
700D408 with 20 kHz ripple current
Temperature rise due to capacitor losses only
Bus heat load NOT included
0
25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105
Case Temperature (^oC)
SBE reserves the right to amend design data
At the Leading Edge of Film Capacitor Technology®