700A60796-155 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Power Ring Film CapacitorsTM

Power Ring Film CapacitorsTM
SBE Part 700A60796-155
Power Ring Film Capacitor™
600 µF, 600 Vdc
The 700A60796-155 Power Ring is a
600 Vdc, 600 µF DC Link Capacitor with
an ESR of 200 micro-Ohms at 20kHz and
an ESL of less than 15nH.
Electrical Specifications
SBE Part #:
700A60796-155
Capacitance/Tolerance: 600 µF ±10%
DC Voltage Rating: 600 Vdc
Dielectric/Construction: Metallized polypropylene film.

Dual windings integrated to a
laminar bus.
Dielectric Withstand Units 100% tested at a DC
Voltage:
voltage of 750 Volts for
2 minutes at +25°C
ESL at Output Tabs:

Less than 15 nH for unit as
shown (value does not include
effects from any additional
hardware, bus adaptor, etc.)
Operating Temperature: -40°C to +85°C at full rated
voltage
Voltage, Temperature De-rate voltage linearly to 400
De-rating:
volts from + 85°Cto + 105°C
System Fault Current 3,000 Amps maximum
Rating:
(external to capacitor)
Typical ESR vs. Frequency:
1.4
1.2
1
0.8
0.6
0.4
0.2
0
0.01
0.1
1
10
Frequency (kHz)
RMS Current Rating:
500
450
400
350
300
250
Bus Side Cooling Only
200
Two-Sided Cooling
150
700A155 with 20 kHz ripple current
100
Temperature rise due to capacitor losses only
50
Bus heat load NOT included
100
0
25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105
Bus Temperature (^oC)
SBE reserves the right to amend design data
At the Leading Edge of Film Capacitor Technology®