700A15899-509 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Power Ring Film CapacitorsTM

Power Ring Film Capacitors^TM
SBE Part 700A15899-509
Power Ring Film Capacitor™
1500 µF, 900 Vdc
The 700A15899-509 Power Ring is a 900Vdc,
1500 µF DC Link Capacitor on a laminated
bus with an ESR of 150 micro-Ohms at 20kHz
and an ESL of less than 15nH.
Electrical Specifications
SBE Part #:
700A15899-509
Capacitance/Tolerance: 1,500 µF ±10%
DC Voltage Rating: 900 Vdc
Dielectric/Construction: Metallized polypropylene film.
Single section design integrated
with a laminar bus.
Dielectric Withstand: Units 100% tested at DC
potential of 1,125 Volts for
2 minutes at 25°C
Thermal Resistance:
0.77°C/W (case side cooling
only) and 0.36°C/W (case and
bus side cooling only)
Operating Temperature: -40°C to +85°C hotspot
temperature at full DC voltage
rating
Voltage, Temperature
De-rating:

De-rate voltage linearly to
600 Vdc from +85°C to +105°C,
with respect to hotspot
temperature
ESL at Output Tabs:
Less than 15 nH for unit as
shown (value does not include
effects from additional
hardware, bus adaptor, etc.)
System Fault Current
Rating:
10,000 Amps maximum
(external to the capacitor)
Typical ESR v_Ts_y._pF_icr_ae_{l 7}q₀u_0De₅n₀c₉y_E:_{SR vs Frequency}
0.6
RMS Current Rating:
600
0.5
500
75C Hotspot 50FIT (1 x Rated V)
440Arms at 50C Case Temperature
0.4
400
0.3
300
0.2
200
0.1
0
0.01
100
0.1
1
10
Frequency, KHz
0
25
30
35
40
45
50
55
60
65
70
75
100
Case Temperature (^oC)
SBE reserves the right to amend design data
At the Leading Edge of Film Capacitor Technology®