700A158911-590 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Power Ring Film CapacitorsTM

Power Ring Film Capacitors^TM
SBE Part 700A158911-590
Power Ring Film Capacitor™
1500 µF, 1100 Vdc
The 700A158911-590 Power Ring is a
1100Vdc, 1500 µF DC Link Capacitor on a
laminated bus with an ESR of 300 micro-Ohms
at 20kHz and an ESL of less than 15nH.
Electrical Specifications
SBE Part #:
700A158911-590
Capacitance/Tolerance: 1,500 µF ±10%
Thermal Resistance:
0.67°C/W (case side cooling
only) and 0.33°C/W (case and
bus side cooling only)
DC Voltage Rating: 1,100 Vdc
Dielectric/Construction: Metallized polypropylene film.
Single section design integrated
with a laminar bus.
Dielectric Withstand: Units 100% tested at DC
potential of 1,300 Volts for
2 minutes at 25°C
Operating Temperature: -40°C to +85°C hotspot
temperature at full DC voltage
rating
Voltage, Temperature
De-rating:

De-rate voltage linearly to
700 Vdc from +85°C to +105°C,
with respect to hotspot
temperature
ESL at Output Tabs:
Less than 15 nH for unit as
shown (value does not include
effects from additional
hardware, bus adaptor, etc.)
System Fault Current
Rating:
10,000 Amps maximum
(external to the capacitor)
Typical ESR vs. Frequency:
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
0.01
0.1
1
10
Frequency, KHz
RMS Current Rating:
1200
1100
75 C Hotspot 50 FIT (1 x Rated V)
1000
700 Arms at 50C Case Temperature
900
50 FIT Provides an Operational Life
800
> 200,000 Hours
700
600
500
400
300
200
100 100
0
25
30
35
40
45
50
55
60
65
70
75
Case Temperature (^oC)
SBE reserves the right to amend design data
At the Leading Edge of Film Capacitor Technology®