66121 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – STATFREE T2 MATERIAL, LEAD-FREE, DISSIPATIVE, RUBBER, 2-LAYER

Description:
Statfree T2™ meets the worksurface requirements of ANSI/ESD S20.20 and recommendation of ESD S4.1. This material is a dual
purpose rubber matting material. The two layer construction allows it to be used as a dissipative or a conductive matting product.
The soft dissipative layer makes an excellent table mat, ideal for use in soldering and assembly areas. This rubber material has
superior resistance to heat, abrasion, chemicals, and is easy to clean and maintain. Statfree T2™ material will not melt and does not burn
when coming into contact with hot metal parts or soldering debris. It is amine, chloride, sulfide, alumina, and magnesia free. Statfree T2™
is suitable for use with continuous monitors. The green material identifies the worksurface as a Lead-Free work zone. See
illustration on the reverse side.
Statfree T2™ is manufactured without any ozone depleting substances, and is in accordance with the Montreal Protocol.
GREEN
Disclaimer:
All statements, technical data, and recommendations
contained herein are based upon tests we believe to
be reliable. However, the accuracy or completeness
thereof is not guaranteed. The proper and correct
applications of products and data is the responsibility
of the user. Statements or recommendations not
contained herein shall have no force or effect unless
embodied in a written agreement signed by
authorized offers of Desco Industries, Inc.
Limited Lifetime Warranty:
Desco warrants for one year that
Statfree^® matting products will be free
of defects in materials and workman-
ship and will guarantee dissipative/
conductive mat properties for the life of
the mat. Damage to matting caused by
misuse of any kind, including using
inappropriate cleaners is not covered
by Desco Limited Warranty.
Tolerances:
Width +/- .250"
Length +/- .250" every 1
linear foot of running material.
Made in America
© 2006 DESCO INDUSTRIES INC.
Employee Owned
Electrical Properties:
Property
RTT Resistance:
RTG Resistance:
Charge Decay:
Test Method
ESD S4.1
ESD S4.1
FTMS 101C, Method 4046
Value
10⁶ - 10⁸ Ohms
107 - 10⁸ Ohms
0.01 seconds
Electrical Properties obtained by testing to industrial standards by an independent testing laboratory @ 100 Volts and 50% relative humidity
unless otherwise specified. Complete text of the test report is available upon request.
RoHS Compliance Statement
None of the following materials are intentionally added
Specifications:
in manufacturing this product: lead, mercury, cadmium,
hexavalent chromium, polybrominated biphenyls (PBB)
Construction:
Dual-layer rubber material, lead-free
or polybrominated diphenyl ethers (PBDE) as outlined in
Thickness:
0.060" (1.5mm)
the Directive 2002/95/EC Article 4.1. See Desco
Color:*
Green (top), Black (bottom)
Industries Inc. letter on-line at Desco.com.
Texture:*
Slight embossed
Weight:
0.43 lbs./sq. ft. (0.2g/cm²)
Hardness:
65 ± 5 Shore “A”, per ASTM-D2240
Heat Resistance:
Does not melt or burn when coming into contact with hot solder and soldering irons.
Chemical Resistance: Resistance to degradation by inorganic acids, organic acids, reducing agents, aliphatic hydrocarbons, mineral oil,
aldehydes, and amines
*Color and texture may vary between lots and mills
Grounding: This material must be properly grounded for optimum electrical performance. Ask for Technical Bulleltin TB-2000 for mat
grounding instructions.
Cleaning: Use only ESD mat cleaner such as Reztore™ Surface & Mat Cleaner to clean and extend mat useful life. Do not use cleaners
contaiing silicone as silicone will create an insulative film on the surface. Do not use solvent based cleaners as solvents will dry out matting
and may cause curling.
See reverse side for available
mat and roll sizes.
STATFREE T2™ MATERIAL, LEAD-FREE, DISSIPATIVE, RUBBER,
2-LAYER, 0.060" (1.5mm)
DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: www.desco.com
PHONE [phone] FAX [phone]
DESCO EAST: 90 HUDSON RD, CANTON, MA 02021-1407
PHONE [phone] FAX [phone]
MATERIAL STATFREE T2™
DRAWING PM-122
DATE:
2/06