561-CG250 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Nylon PC Board Card

Nylon PC Board Card Guides
.250
Dimensions: in.
A ±.063
B ±.031
.250
Date Last Revised: 10-24-06
.081
.125
.175
Solid
.081
.125
.175
Slotted
Printed circuit board support guides are an economical and fast solution to mount P.C. Boards. Card insertion is simple
and fast. The smooth positive channel guides the P.C. Board and firmly supports and protects the board. Guides are
molded of tough, electrically insulating nylon 6/6 and are designed to snap into pre-punched holes in the chassis.
The Printed Circuit Board Card Guide is designed to fit a .125" + .003" - .001" front diameter hole and a
.120" +/- .005" x .218" slot rear hole.
Part Number
561-CG250
561-0250WS
561-CG300
561-0300WS
561-CG350
561-CG400
561-0400WS
561-CG450
561-0450WS
561-0500G
561-0500WS
561-CG550
561-0550WS
561-CG600
561-0600WS
Description
2 1/2" Guide
2 1/2" Guide w/ Split Legs
3" Guide
3" Card Guide w/ Split Legs
3 1/2" Guide
4" Guide
4" Card Guide w/ Split Legs
4 1/2" Guide
4 1/2" Card Guide w/ Split Legs
5" Guide
5" Card Guide w/ Split Legs
5 1/2" Guide
5 1/2" Card Guide w/ Split Legs
6" Guide
6" Card Guide w/ Split Legs
Dimensions (in.)
A
B
2.5
2
2.5
2
3
2.5
3
2.5
3.5
3
4
3.5
4
3.5
4.5
4
4.5
4
5
4.5
5
4.5
5.5
5
5.5
5
6
5.5
6
5.5
Available from Mouser Electronics
1-800-346-6873
www.mouser.com
EPD-200456
Specifications are subject to change without notice. No liability or warranty implied by this information. Environmental compliance based on producer documentation.