561-23001 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – DIN Rail Clip

.640±.015
DIN Rail Clip
561-23001
Last Revised: 10/26/09
ø.187 (4)
.625±.015
3.350 ± .031
.312 ± .015
Dimensions: in.
The “Din Rail Clip” which attaches to standard Din #2 and #3 rails, is
used to route wire and cables on equipment which uses Din rails. Din
rails are commonly used on a variety of industrial equipment to mount
components on the rails, including PLCs. Until now, there was no prod-
uct specifically designed for wire/cable routing using the Din rail. The
part snaps onto the din rail and is easily removable to allow reconfigu-
ration of the wiring. The top of the Din Rail Clip accommodates up to 4
wire handling accessory fasteners which mount into the 3/16” diameter
(4.8mm) holes on the Din Rail Clip.
SPECIFICATIONS
Description:
Length:
Width:
Thickness:
Clip Width:
ID:
Material:
Flammability Rating:
DIN Rail Clip
3.350±0.031
0.625±0.015
0.640±0.015
0.312±0.015
0.187±0.005
Nylon 6/6
UL94V2
RoHS Compliant
Available from Mouser Electronics
1-800-346-6873 / www.mouser.com
EPD-200809
Specifications are subject to change without notice. No liability or warranty implied by this information. Environmental compliance based on producer documentation.