561-20PTI1-HD Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Power Transistor Mounts PTI-H for TO-3

Power Transistor Mounts PTI-H
for TO-3
561-20PTI1-HD, 561-18PT1-HD-WOB
Date Last Revised: 2/23/2008
1.188
.665
.042
.425
ø.140 Thru (2)
R.187 (2)
.505
.387
.053
ø.187(2)
.062
ø.112(2)
Molded in Glass Filled Polyester
Dimensions: in.
Simplify power transistor mountings and insulation, and improve thermal
efficiency with molded insulators. These insulators are molded of glass
filled polyester for heavy duty uses. They replace up to six pieces of
conventional insulation required with previous mountings. They also
increase the amount of interface surface between device and sink by
minimizing clearance holes required for all feed-thru connectors. They also
have a built-in barrier which not only eliminates need for sleeving of base
and emitter connections, but also serves as an assembly aid
during installation.
SPECIFICATIONS
Mouser Stock No.
561-18PT1-HD-WOB
561-20PTI1-HD
Description
PTI-1 HD w/o Barrier
PTI-1 HD
Available from Mouser Electronics
1-800-346-6873 / www.mouser.com
EPD-200711
Specifications are subject to change without notice. No liability or warranty implied by this information. Environmental compliance based on producer documentation.