561-19PT1 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Power Transistor Mounts PTI-1 for TO-3

Power Transistor Mounts PTI-1
for TO-3
561-19PT1, 561-189PTI-WOB
Date Last Revised: 1/5/2009
1.562
1.18
.665
.545
.432
.559
.375
.031 _.062
.093
.189
ø.112(2)
Dimensions: in.
Simplify power transistor mountings and insulation, and improve thermal
efficiency with moded insulators. There insulators are molded of Type 6/6
Nylon for regular applications. They replace up to six pieces of conventional
insulation required with previous mountings. They also increase the amount of
interface surface between device and sink by minimizing clearance holes
required for all feed-thru connectors. They also have a built in barrier which not
only eliminates need for sleeving of base and emitter connections, but also
serves as an assembly aid during installation
Mouser Stock No.
561-189PTI-WOB
561-19PT1
Description
PTI-1 w/o Barrier
PTI-1
Available from Mouser Electronics
1-800-346-6873 / www.mouser.com
EPD-200713
Specifications are subject to change without notice. No liability or warranty implied by this information. Environmental compliance based on producer documentation.