5311 Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – 1-5/16 Diameter Single Turn Wirewound Precision Potentiometer

MODEL 5311
1-5/16” Diameter
Single Turn
Wirewound
Precision Potentiometer
ELECTRICAL
Resistance Range, Ohms
Standard Resistance Tolerance
Minimum Practical Resistance Tolerance
Independent Linearity
Minimum Practical Independent Linearity
Input Voltage
Power Rating, Watts
Dielectric Strength
Insulation Resistance, Minimum
Noise, Maximum
Actual Electrical Travel
Tap Tolerance
End Voltage, Maximum
ENVIRONMENTAL (MIL-R-12934)
Operating Temperature Range
Temperature Cycling
Shock, 6ms Sawtooth
Vibration
Moisture Resistance
High Temperature Exposure
Rotational Load Life
Specifications subject to change without notice.
2
10 to 44.6K
±3% (±5% ≤40 Ohms)
±1%
±0.5% (±1% ≤250 Ohms)
±1.0%, ≤40 Ohms
±0.75%, 41-99 Ohms
±0.5%, 100-249 Ohms
±0.25%, ≥250 Ohms
400Vdc not to exceed power rating
2.0 at 40°C derating to 0 at 85°C
1,000V rms
1,000 Megohms
100 Ohms (250 Ohms: RT ≤500 Ohms)
352° ±2 °Continuous model
350° ±2° Stop model
±1° (±2° <100 Ohms)
Linearity x Input Voltage
–25°C to +85°C
5 cycles, -25°C to +85°C (5% ∆R)
100G’s (0.1ms discontinuity max.)
10G’s, 10 to 500 Hz (5% ∆R, 0.1ms discontinuity max.)
Five 24 hour cycles (3% ∆R)
1,000 hours at 85°C (5% ∆R)
500K shaft rev. at rated wattage at 85°C (5% ∆R)
2-43
Model 5311