|
50FY-BMT-TBLFSN Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – FY CONNECTOR 0.5mm pitch/Connectors for FFC | |||
|
FY CONNECTOR
NNÏον 0.5mm pitch/Connectors for FFC
NON- Emboss Tape
0.5mm pitch non-ZIF snap-in type FFC
connector.
⢠Heat resisting design suitable for surface
mounting
⢠One-sided contact construction
⢠Solder tabs
⢠Embossed tape for automatic mounting
Specifications âââââââââââââââââââ
⢠Current rating: 0.3A AC, DC
⢠Voltage rating: 30V AC, DC
⢠Temperature range: -25ËC to +85ËC
(including temperature rise in applying
electrical current)
⢠Contact resistance: Initial value/50m ⦠max.
After environmental testing/70m ⦠max.
⢠Insulation resistance: 100M ⦠min.
⢠Withstanding voltage: 200V AC/minute
⢠Applicable FFC: Conductor pitch/0.5mm
Conductor width/0.3mm
Mating part thickness/0.3±0.03mm
* Compliant with RoHS.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ââââââââââââââââââââââ
0 Recognized E60389
1Certified LR20812
PC board layout (viewed from component side) and Assembly layout
Top entry type
4.05
ʶ
ʶ
Side entry type
ʶ
ʶ
5.2
Note: 1. Tolerances are non-cumulative: ±0.03mm for all centers.
2. The dimensions above should serve as a guideline. Contact JST for details.
1
|
▷ |