4210 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – LPR Router Modules

LPR Router Modules
Models 42100R, 42101R, 42102R, 42103R, 42104R, and 42105R
M Router for TP/FT-10, TP/XF-78, and TP/XF-1250
LONWORKS^® (ANSI/CEA-709.1) channels
M Screw terminal wiring connections
M 16-30VAC or VDC operation
M Network access from front panel jacks
M Two-piece design cuts installation time, cost
M U.L. Listed, cU.L. Listed, CE Mark, FCC
LonPoint^® Modules
The LonPoint Modules are products designed to integrate
new and legacy sensors and actuators, as well as LONMARK^®
devices, into cost-effective, interoperable, control systems for
building and industrial applications. In contrast to traditional
control networks, which use closed islands of control linked
with proprietary gateways, the LonPoint Modules offer an open
distributed system architecture in which every device performs
some control processing and can be accessed from any location
in the network. Distributing the processing throughout the
network and providing open access to every device lowers the
overall installation and life cycle costs, increases reliability by
minimizing single points of failure, and provides the flexibility
to adapt the system to a wide variety of applications.
The system consists of the LonPoint Interface, Scheduler,
Data Logger, Router Modules, LonPoint Application Programs,
LNS^® based LonMaker^® Integration Tool, LonPoint Plug-In
and LNS DDE Server. The LPR Router Modules may be used
with a LonPoint System or as part of any LONWORKS network.
LPR-10 Modules
The LPR Modules are two-channel LONWORKS
(ANSI/EIA-709.1) routers that can interface two different
twisted pair channels (e.g., a high speed 1.25Mbps TP/XF-
1250 backbone and a TP/FT-10 free topology channel), manage
network traffic, increase the total number of LONWORKS
devices, or increase the amount of cabling in a system.
Six different models of LPR Routers are available:
Name
Model Channel Types
LPR-10
42100R TP/FT-10 to TP/FT-10
LPR-11
42101R TP/FT-10 to TP/XF-78
LPR-12
42102R TP/FT-10 to TP/XF-1250
LPR-13
42103R TP/XF-78 to TP/XF-78
LPR-14
42104R TP/XF-78 to TP/XF-1250
LPR-15
42105R TP/XF-1250 to TP/XF-1250
LPR Routers can be installed as repeaters, configured
routers, or learning routers.
Models 42100R, 42101R, 42102R, 42103R, 42104R, and
42105R are compliant with the European Directive
2002/95/EC on the restriction of the use of certain hazardous
substances (RoHS) in electrical and electronic equipment.
Using the LonMaker tool, the user configures and commis-
sions the LPR Routers and other LonPoint modules, as well as
third-party LONMARK and LONWORKS devices, to create an
interoperable, distributed control system. Network design and
configuration is simplified by the Visio^® interface of the
LonMaker tool, which can both import and export AutoCAD^®
files and generate as-built documentation.
A unique, two-piece design allows pre-wiring and cable
testing by an electrician prior to installation of the electronics;
technician time can be reserved for tasks such as node configu-
ration. Power and network wiring are “looped” through the
base plate, providing the ability to replace modules by hot-
plugging without disrupting the operation of the two network
channels.
Service
Switch
Service
LEDs
Network A
Network B
Network Access Jacks; use
with Echelon PCC-10 Cable
Model 78303
Network A
Network B
LPR
UL C UL _US
MODEL 42100 972 LISTED 178K
SW VERSION 1 .0 ENERGY MANAGEMENT
ID NUMBER
EQUIPMENT SUBASMBLY
LPR MODEL 42100˚˚ID NUMBER
LPR MODEL 42100˚˚ID NUMBER
LonPoint Interface
Model and Software
Revision
Peel-Off Code 39
Format Bar Code of
LonPoint Interface
Neuron Chip ID
Number
Packet Activity LED
Router Transferring
Packets: Flashing
Power LED:
Power On: Illuminated
Continuously