English
Language : 

4075B Datasheet, PDF (1/6 Pages) List of Unclassifed Manufacturers – 14-bit, 200 MSa/s, 16 Mpts arbitrary waveform generator
Data Sheet
Arbitrary/Function Waveform Generators
4075B Series
Point-by-Point Signal Integrity
The 4075B Series Arbitrary/Function Waveform
Generators are versatile high-performance
single- and dual-channel arbitrary waveform
generators with large arbitrary memory depth. The
instruments provide variable output voltages from
0 to 10 Vp-p into 50 ohms or up to 20 Vp-p into
open circuit and a continuously variable DC offset
that allows the output to be injected directly into
circuits at the correct bias level.
These generators combine the benefits of DDS
(direct digital synthesis) and true AWG (arbitrary
waveform generator) architectures without the
limitations of either. Standard waveforms such as
sine, square, and triangle are generated with a
DDS chip, delivering great frequency resolution at
a low cost. Custom arbitrary waveform generation
is implemented with a true point-by-point design,
offering improved signal integrity by producing
significantly less jitter and distortion compared
to a DDS-only architecture. This point-by-point
generation capability allows these instruments
to be used for simulating reliable clock signals,
generating triggers, or validating serial data
buses.
Additionally, these generators can be used with
B&K Precision’s waveform editing software
WaveXpress to create complex arbitrary
waveforms.
Extensive features such as internal or external
AM, FM, and FSK modulation along with
versatile sweep capabilities and variable edge
pulse generation make these generators suitable
for a wide range of applications.
Applications
These generators are suitable for applications
such as electronic design, sensor simulation,
functional test, or generation of I/Q modulated
signals.
Model
4075B 4078B
Channels
1
2
Sine frequency range
1 µHz – 30 MHz
Square frequency range
Arbitrary waveform length
1 µHz – 30 MHz
1 Mpts
4076B 4079B
1
2
1 µHz – 50 MHz
1 µHz – 50 MHz
4 Mpts
4077B 4080B
1
2
1 µHz – 80 MHz
1 µHz – 60 MHz
16 Mpts
Features
I 14-bit, 200 MSa/s, 16 Mpts arbitrary
waveform generator
I Generate sine waveforms up to 80 MHz
I Bright color LCD display
I Linear and logarithmic sweep
I AM/FM/FSK modulation
I Variable DC offset
I Adjustable duty cycle
I Output ON/OFF button
I Internal/external triggering
I Gate and burst mode
I Fully programmable markers
I Store/recall up to 49 instrument settings
I Standard USBTMC interface (all models) and
GPIB interface (50 MHz & 80 MHz models
only) supporting SCPI commands
I Closed case calibration
I Short circuit protection for resistive and
capacitive loads on outputs and overvoltage
protection on inputs
Dual-channel models
I Both channels offer full functionality and all
parameters can be set independently
I Synchronize the phase of both channels with
the push of a button
For more information, visit www.bkprecision.com/WaveXpress
Technical data subject to change
© B&K Precision Corp. 2014
www.bkprecision.com