4033 Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – Repetition rate of 0.1 Hz to 50 MHz

Data Sheet
50 MHz Programmable Pulse Generators
Models 4033 & 4034
Description
The 4033 and 4034 are high performance pro-
grammable pulse generators for testing digital
systems and circuits based on TTL, CMOS, or
ECL technologies. Both instruments generate
clean and accurate pulses at up to 6 digits reso-
lution with a repetition rate up to 50 MHz, vari-
able pulse widths from 10 ns to 10 s, and pulse
delays from 0 ns to 10 s. Output levels are
adjustable from -10 V to +10 V, with pulse
amplitudes settable from 0.1 Vpp to 10 Vpp into
a 50 ohm load. All parameters, modes, and
functions are programmable via the front panel
or remote control commands. Additionally, the
pulse generators provide selectable complemen-
tary pulse and double pulse generation in contin-
uous, triggered, gated, and counted burst
modes.
Features & Benefits
I Repetition rate of 0.1 Hz to 50 MHz
I Flexible trigger modes: Continuous, Triggered
(internal, external, manual), Gated Burst and
External Width
I Pulse width programmable from 10 ns to 10 s
I Transition times (rise and fall times) variable
from 6 ns to 100 ms
I Programmable delay and double pulse
I Predefined amplitude levels for ECL, TTL, and
CMOS signals
I Store up to 99 different test setups with auto
retention of last power down setup
I 10 Vpp into 50 ohm output
I Closed case calibration
I Programmable via GPIB and RS-232
I SCPI compatible
I Three year warranty
Dual-Channel Model 4034
I Both channels offer full functionality and all
parameters such as pulse width and transition
time can be set independently
I Synchronize both channels with the push of a
button
I Saves cost and bench space
Applications
I Automatic Test Equipment (ATE)
I Avionics and radar testing
I Switching power supply testing
I Characterization of active components
Technical data subject to change
© B&K Precision Corp. 2010
www.bk precision.com