4017A Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – Function Generators

Data sheet
Function Generators
Models 4017A & 4040A
Model 4040A
These analog function generators offer familiar controls, stable
output, and reliable operation at budget-saving price points.
4017A
10 MHz Sweep
Function Generator
I 0.1 Hz to 10 MHz
I Sine, Square, Triangle,
Pulse, & Ramp output
I Coarse and Fine tuning
I 5 digit LED display
I Linear and log sweep
I Variable duty cycle
I Variable DC offset
I cUL certified
4040A
20 MHz Sweep
Function Generator
I 0.2 Hz to 20 MHz
I Sine, Square, Triangle,
Pulse, & Ramp output
I Coarse and Fine tuning
I AM & FM modulation
I Burst operation
I External frequency
counter to 30 MHz
I Linear and log sweep
I Variable duty cycle
I Variable DC offset
I cUL certified
Model 4040A
AM Modulation Characteristics
Source
Modulation Ratio
Internal, External
0 to 100%
Int modulation
Ext Modulation
1 kHz
DC to 500 kHz
Ext Sensitivity
Less than 10V p-p for 100% modulation
FM Modulation Characteristics
Source
Modulation Ratio
Internal, External
0 to 100%
Deviation
INT Modulation
0 to 5%
1 kHz
Ext Modulation
Ext Sensitivity
DC to 500 kHz
Less than 10V p-p for 100% modulation
Burst Characteristic
Source
Burst Width
Internal, External
Cont. variable from 5% to 90% of internal gating frequency
Repition Rate
0.5 Hz to 50 Hz, internal
DC to 500 kHz external
External Level
TTL levels
Burst Frequency
Determined by main generator frequency setting
Specifications
4017A
4040A
Frequency Characteristics
Waveforms
Sine, Square, Triangle, ±Pulse, ±Ramp
Range
0.1 Hz to 10 MHz in 8 ranges
0.2 Hz to 20 MHz in 8 ranges
Resolution
5 digits
5 digits
Tuning Range
10:1
10:1
Fine
±5% of coarse setting
±5% of coarse setting
Variable Duty Cycle
15:85:15 cont variable
15:85:15 cont variable
Operating Modes
Normal, sweep, VCG
Normal,sweep, VCG, AM, FM,burst
Output Characteristics
Impedance
50Ω ±10%
Level
20 V p-p Open circuit, 10V p-p into 50Ω
Amplitude
Variable, 20 dB range typical
Attenuation
-20 dB ±1dB
DC Offset
Preset ±0.1 V typ Variable: ±10V open-circuit ±5 into 50Ω
Sine Wave
Distortion
≤ 3% typical at 1 kHz
Flatness
±5% (.45 dB) 0.1 Hz to 8 MHz
±20% (2.0 dB) 8 MHz to 10 MHz
±5% (.45 dB) 10 Hz to 8 MHz
±20% (2.0 dB) 8 MHz to 20 MHz
Square wave
Symmetry
0.1 Hz to 100 kHz <2%
0.2 Hz to 100 kHz <2%
Rise time
≤ 30 ns
Triangle Wave
Linearity: ≥ 98% to 100 kHz
TTL Output
Level
0.8V to 2.4V
Rise time
≤ 20 nS
Duty Cycle
50% typical
CMOS Output
Max. Frequency
2 MHz
Level
4V to 14V ±0.5 p-p cont. variable
Rise Time
≤ 120 nS
VCG (Voltage controlled generator)
Input Voltage
0-10V ±1V causes a 100:1 frequency change
Impedance
10kΩ ±5%
Sweep Operation
Mode
LIN/LOG
Width
100:1 continuously variable
Rate
0.5 s to 30 s cont variable
20 ms to 2 s cont variable
Sweep Output
0 to 10 V
0 to 2 V
Start/Stop Frequencies
NA
Adjustable
Frequency Counter
Accuracy
Time base accuracy ±1 count
Time Base Accuracy
±10 ppm (23° ±5°C)
Display
5 digit LED
Mode
NA
INT or EXT
External Input
Frequency
Does not apply
5 Hz to 30 MHz
Resolution
Does not apply
0.1, 1, 10, 100, 1 kHz
Sensitivity
Does not apply
25 mVrms
General
AC Input
120/230 VAC ±10%, 50/60 Hz, internal jumper selectable
Dimensions
4.5 x 11.75 x 10.575"
(140 x 298 x 264mm)
5.5 x 11.75 x 10.575"
(114 x 298 x 264mm)
Weight
Included Accessories
4 lbs. (1.8 kg)
4.5 lbs. (2 kg)
Two-Year Warranty
Output Cable with BNC to Alligator Clips,
Instruction Manual Carrying Case (not included): LC-40
Technical data subject to change
© B&K Precision Corp. 2014
v050114
www.bk precision.com
Tel.: [phone]