37801 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – TEK-MATE BOARD HANDLERS

Features
W
- - - - - - - - - - - - - - ^{- - - - - - - - -L- - - - - - - - - - - - - - - - - - - - - - - -}
• Portable ESD worksurface that can also be used to
transport populated, unsoldered circuit boards
• Static dissipative foam (RTT 10E6 - 10E8 ohms) laminated to
Protektive Pak^® impregnated corrugated material for greater
durability
• Foam is shuntable, component leads can be kept at equipotential
and more stable when moved
• Includes 10mm (3/8”) grounding snap
• Static dissipative material 10E6 - 10E8 ohms
• Buried shielding layer minimizes sloughing and rub-off contamination
• Made in America
SPECIFICATIONS FOR CORRUGATED MATERIAL:
Properties
Typical Values
Electrostatic Decay
0.01 seconds at 72°F and 11.8% R.H.
Surface Resistance
10E6 - 10E8 ohms/sq. after 11 days at 68°F and 12% R.H.
for surface. 10E3 - 10E4 ohms/sq. for buried shielding layer
High-Voltage Discharge Resistance Failure rate 0/5 (no oxide damage in five consecutive tests)
Static Shielding
99.9% attenuation at 10kV; 99.6% attenuation at 30kV
Charged Device Model (CDM) Safety RTG >10E7 ohms at 86% R.H. or less
Corrosivity
Contains 1-3 ppm reducible sulfur
Sloughing Test
Negligible surface damage at 10 cycles and <5% of surface
damage at 200 cycles in Taber Abrasion Test.
No conductive particles abrased from surface
Recyclability
Complete recyclability of package
Biodegradability
Biodegradation in or on moist soil
Volume Conductivity
Conductivity from wall to wall as well as across surface
to assure permanence of the antistatic property
Shelf Life
Indefinite
Test Procedures/Method
FED-STD-101, Method 4046
ASTM D257
Rockwell International Test Report of December 20, 1991
EIA 541, appendix E, capacitive probe test
Rockwell International Test Report of December 20, 1991
FED-STD-101, Method 3005 for reducible sulfur
ASTM D4060 at 70 rpm with CS-17 abrasive-coated
wheels and 1000 grams load
Rockwell International Test Report of January 8, 1992
Rockwell International Test Report of January 8, 1992
Rockwell International Test Report of January 8, 1992
SPECIFICATIONS FOR FOAM:
Property
Test Method
Density
ASTM D3575-91
Surface Resistivity
EOS/ESD DS111-1993
Corrosivity
TS 1021BA (UK MOD)
Water Extract
TS 1021BA (UK MOD)
Total Chlorine
TS 1021BA (UK MOD)
Recommended Operating
Temperature Range
Internal
Tear Strength
ASTM D3575-91
Tensile Strength
ASTM D2575-91
Results
1.9 lb/ft³
10E7 - 10E9 ohms/sq
Pass
Pass
Pass
Item No.
37800
39852
37801
39854
Size - L x W
12 x 18
12 x 18
18 x 24
18 x 24
+200°F to -95°F
14 lbf/in
44 psi
TEK-MATE™ BOARD HANDLERS
Snap
Male
Female
Male
Female
Made in America
PROTEKTIVE PAK
13520 MONTE VISTA AVENUE, CHINO, CA 91710
PHONE [phone], FAX [phone]
ProtektivePak.com
DRAWING NUMBER
37800
DATE:
11/06
© 2006 DESCO INDUSTRIES INC.
Employee Owned