37058 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – CIRCUIT BOARD SHIPPERS

Features
• Efficient means of shipping or storing ESD sensitive circuit boards and other
items
• Provides ESD shielding with lid closed; “Faraday Cage” effect restricts
electrostatic charges to exterior
• For physical protection, convoluted foam secures items, minimizing movement
and reduces stress from physical shock
• No assembly required
• Convoluted static dissipative <10¹¹ ohms polyurethane pink foam laminated to
top and fitted in bottom
• Available with or without foam
D
• Made in the United States of America
SPECIFICATIONS
Properties
Electrostatic Decay
Surface Resistance
High-Voltage Discharge Resistance
Static Shielding
Current-Carrying Hazard
Corrosivity
Antistat Transfer
Water & Isopropyl Alcohol Extraction
Tests for Antistat Permanence
Sloughing Test
Recyclability
Biodegradability
Volume Conductivity
Shelf Life
-
-
-
-
--
L
-
-
-
-
-
-
-
W
Typical Values
0.01 seconds at 72°F and 11.8% R.H.
1 x 10⁵ to < 1 x 10¹¹ ohms
Failure rate 0/5 (no oxide damage in five consecutive tests)
99.9% attenuation at 10kV; 99.6% attenuation at 30kV
10³ mA at 110V; 10³ mA at 220V
Contains 1-3 ppm reducible sulfur
No transfer
Surface resistance 10⁸ - 10⁹ ohms/square at 74°F
and 36% R.H.
Negligible surface damage at 10 cycles and <5% of surface
damage at 200 cycles in Taber Abrasion Test.
No conductive particles abrased from surface
Complete recyclability of package
Biodegradation in or on moist soil
Conductivity from wall to wall as well as across surface
to assure permanence of the antistatic property
Indefinite
See reverse side for
available sizes.
Test Procedures/Method
FED-STD-101, Method 4046
ANSI/ESD STM11.11
Rockwell International Test Report of December 20, 1991
EIA 541, appendix E, capacitive probe test
ESD from A to Z
FED-STD-101, Method 3005 for reducible sulfur
Rockwell International Test Report of January 8, 1992
Rockwell International Test Report of January 8, 1992
ASTM D4060 at 70 rpm with CS-17 abrasive-coated
wheels and 1000 grams load
Rockwell International Test Report of January 8, 1992
Rockwell International Test Report of January 8, 1992
Rockwell International Test Report of January 8, 1992
Made in the
United States of America
Specifications and procedures subject to change without notice.
© 2013 DESCO INDUSTRIES INC.
Employee Owned
CIRCUIT BOARD SHIPPERS
PROTEKTIVE PAK
1350 MONTE VISTA AVENUE, CHINO, CA 91710
PHONE [phone], FAX [phone]
ProtektivePak.com
DRAWING NUMBER
37050
DATE:
December
2013