3641NF Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – Sealed toggle switches for outdoor applications

3600NF series
Sealed toggle switches for outdoor applications
Distinctive features and specifications
❑ Sealing obtained by :
- O-ring between lever and bushing
- half-length boot and nylon washer (supplied mounted)
- elastomer gasket between cover and case
- molded-in terminal inserts
- sealing washer U60
A
❑ Solid silver contacts
❑ UL approved
ELECTRICAL SPECIFICATIONS
• Max. current/voltage rating with resistive load : 12A 28VDC - 6A 250VAC
• Initial contact resistance : 10 mΩ max. at 1A 2VDC
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength :
2.500 Vrms 50 Hz min. between terminals
3.000 Vrms 50 Hz min. between terminals and frame
• Electrical life : 10.000 cycles at full load
GENERAL SPECIFICATIONS
• Torque : 1,50 Nm (1.10 Ft.lb) max. applied to nut
• Panel thickness : 2 mm (.079) max. with all accessories
• Operating temperature : -40°C to +85°C
MATERIALS
• Case : phenolic resin
• Actuator : brass, nickel plated
• Bushing : brass, nickel plated
• Contacts : solid silver
AGENCY APPROVAL
Availability : consult factory for
details or approved models.
Marking : to order switches
marked UL, complete last box of
ordering format.
ABOUT THIS SERIES
Dimensions : first dimensions are in mm while inches are shown as bracketted numbers.
Mounting accessories : 1 sealing boot U1151, 1 hex nut U166, 1 nylon washer U21 and 1 sealing washer U60. See section I.
Packaging unit : 25 pieces per type and colour.
APEM
www.apem.com
A-115