3540I Datasheet, PDF (1/5 Pages) List of Unclassifed Manufacturers – DC Microstep Drive w/ Si Programming

Applied Motion Products, Inc.
404 Westridge Dr.
Watsonville, CA 95076, USA
1-800-525-1609
Tel [phone]
Fax (831) 761-
6544
Product Datasheet
www.Applied-Motion.com
3540i
DC Microstep Drive w/ Si Programming
1pc. - 427.00
50pc. - 320.25
Product Features
On-board indexer
Si programming
Microstepping
Idle current reduction
Programmable motor current
8 user-programmable inputs
3 user-programmable outputs
Screw terminals
Description
The 3540i step motor drive is a programmable, microstepping, bipolar stepper drive suitable for a wide range of
motion control applications. It includes an intuitive, user-friendly programming language for creating powerful
indexing programs that are stored in the drive and allow the drive and motor to run stand-alone. 8 digital inputs
and 3 digital outputs faciliate interfacing to other devices, such as PLCs, sensors, switches, etc.
The 3540i includes Applied Motion’s easy-to-use Si Programmer™ software for the rapid development of stand-
alone motion control programs. The 3540i can also be controlled via streaming serial commands using Applied
Motion’s Serial Command Language (SCL).