3187 Datasheet, PDF (1/1 Pages) KR Electronics, Inc. – 321.4 MHz Center Freqency

SmartiPi Touch - Stand for Raspberry Pi 7" Touchscreen Display
PRODUCT ID: 3187
Description
Here is an excellently designed stand that provides a sleek and sturdy look for the 7" Touchscreen
Display and Raspberry Pi. Say hello to the SmartiPi Touch.
The 7" Display is secured into the case with four screws and the Raspberry Pi is enclosed in the
compartment on the back of the case. A simple door covers the Pi in the compartment allowing
for the display ribbon cable to connect to the Raspberry Pi DSI port.
You can power the display 2 ways - by either running two jumper wires from the raspberry Pi
GPIO (will conflict with HATs) or using separate micro USB cables (or splitter cable) to power the Pi
and display independently.
Features:
Compatible with Raspberry Pi 3, 2, B+, and A+
125° smooth pivot that allows you to adjust the angle of the screen
HAT boards can be attached to the back of the case, adding even more functionality
3D printable accessories for additional customization
LEGO compatible camera case that works with Pi camera version 1 and 2
Please note: The 7" Touchscreen Display and Raspberry Pi are not included. The HDMI port on
the Raspberry Pi is not accessible when enclosed.
Technical Details
Product Dimensions: 220.0mm x 133.0mm x 37.0mm / 8.7" x 5.2" x 1.5"
Product Weight: 221.2g / 7.8oz
Engineered in NYC Adafruit ®