|
30FLT-SM2-TBLFSN Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – FLT CONNECTOR 0.5mm pitch/Connectors for FPC | |||
|
FLT CONNECTOR
NNÏον 0.5mm pitch/Connectors for FPC
NON- Emboss Tape
⢠Heat resisting design suitable for surface
mounting
⢠Staggered surface mount tails
⢠Embossed tape for automatic mounting
⢠FPC insertion is easy
⢠Compact design
Specifications âââââââââââââââââââ
⢠Current rating: 0.5A AC, DC
⢠Voltage rating: 50V AC, DC
⢠Temperature range: -25ËC to +85ËC
(including temperature rise in applying
electrical current)
⢠Contact resistance: Initial value/50m ⦠max.
After environmental testing/20m ⦠max.
(variation from initial value)
⢠Insulation resistance: 500M ⦠min.
⢠Withstanding voltage: 200V AC/minute
⢠Applicable FPC: Conductor pitch/0.5mm
Conductor width/0.35mm
Mating part thickness/0.3±0.05mm
Note: FPC to be actually used should be checked for applicability.
* Compliant with RoHS.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ââââââââââââââââââââââ
0 Recognized E60389
1Certified LR20812
PC board layout (viewed from component side) and Assembly layout
Circuit No.1
ʶ
ʶ
Note: 1. Tolerances are non-cumulative: ±0.05mm for all centers.
2. The dimensions above should serve as a guide line. Contact JST for details.
1
|
▷ |