English
Language : 

3001_14 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – 20 Hz to 150 kHz Sine/Square Wave Audio Generator
Data Sheet
Audio Generator
Model 3001
The model 3001 generates low-distortion sine waves at
46 discrete frequencies. Output impedance is 600 Ω at
the dual banana jacks and the output voltage is
continuously adjustable up to 1.2 V (RMS) into an open
circuit. Output flatness is ±0.5 dB. A 5 Vpp square
wave is provided at separate banana jacks for
synchronization. Frequency accuracy is 3% from
20 Hz to 100 kHz. The unit is powered by a 9 V
battery.
I 20 Hz to 150 kHz Sine/Square Wave Audio Generator
I Sine and square wave generator
I 20 Hz to 150 kHz in 46 steps
I Low distortion RC oscillator
I Variable output control
I Compact, fully portable, light weight
I Low battery indicator
Specifications
3001
Frequency Range
x1 range 20 Hz to 1.5 kHz (23 steps),
x100 range 2 kHz to 150 kHz (23 steps)
Accuracy
20 Hz through 100 kHz (±3% or less),
120 kHz and 150 kHz (±5% or less)
Output Control
0 dB/-20 dB attenuator switch and variable amplitude control
Output impedance
approx. 600 Ω
Sinewave Characteristics
Output Voltage
>1.2 V rms at max. setting (no load)
Output Flatness
(Short term) 20 Hz to 150 kHz ±0.5dB ( reference frequency 1 kHz)
Distortion
200 Hz—15 kHz 0.5% (THD) or less, 50 Hz—28 kHz 0.1% (THD)
or less, 20 Hz—100 kHz 0.3% (THD) or less
Square wave Characteristics
Output Voltage
> 5V p-p at maximum setting
Rise and Fall Time
< 0.5 µs
Sag
< 5% at 20 Hz (DC coupled)
Over Shoot
< 2% from maximum output, to 50 mV p-p
Duty Ratio
50% +5%
Sync Output Characterisitics (Other specifications same as sinewave characteristics)
Output Voltage
>1.2V rms (no load)
Output Impedance
1 kΩ+5%
General
Operating Temperature
0°C to +50°C; specifications apply from 10°C to 30°C, <80% R.H.
Storage Temperature
-20°C to +60°C, without battery
Power Requirements
9V battery NEDA 1604A
Battery Life
35 hours typical with Alkaline
Battery Indicator
LED indicates low battery
Dimensions (H x W x D)
6 x 3.3 x 0.9" (150 x 82 x 21mm)
Weight
7 oz. (200 g) including battery
One-Year Warranty
Included Accessories
Two standard banana plug to insulated clip test leads,
9V battery, instruction manual
Technical data subject to change
© B&K Precision Corp. 2014
v080514
www.bkprecision.com