2870 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – Heavy Duty 1500 VDC rating

2870
2860A
The “Survivor” name says it all!
■ Heavy Duty 1500 VDC rating
■ Ruggedized construction
■ Includes rubber boot
■ Withstands 5-foot drop
■ Extra large, high contrast LCD display
■ Gasket sealed against dirt and contaminants
■ Water resistant
■ High energy fused on all current ranges
■ Auto power off saves batteries
■ Built in probe holders
■ Non-slip grip
■ Extensive overload protection
Model 2870
■ 0.25% DCV accuracy
■ True RMS
■ Autoranging
■ Analog bargraph
■ 3 3/4 digit, 3200 count
■ Data hold, delay hold
Model 2860A
■ 0.5% DCV accuracy
■ Manual ranging
■ 3 1/2 digit, 2000 count
■ Large 0.8" LCD display
Specifications
2870
models
2860A
DC Volts
Ranges
Resolution
Auto/Manual ranging
320mV, 3.2V, 32V, 320V, 1500V
100µV, 1mV, 10mV, 100mV, 1V
Manual ranging
200mV, 2V, 20V, 200V, 1500V
100µV, 1mV, 10mV, 100mV, 1V
Accuracy
Overload protection
Input Impedance
AC Volts
±(0.25% rdg + 2 dgt)
1500V peak
10MΩ
Auto/Manual ranging
±(0.5% rdg + 1 dgt)
1500V peak
10MΩ
Manual ranging
Ranges
Resolution
True RMS
3.2V, 32V, 320V, 750V
1mV, 10mV, 100mV, 1V
avg. responding, rms reading
200mV, 2V, 20V, 200V, 1000V
100µV, 1mV, 10mV, 100mV, 1V
Accuracy
Frequency Response
Overload Protection
Input Impedance
±(1.3% rdg + 3 dgt)
40Hz - 1kHz
1100V peak
10MΩ
±(1.25% rdg + 4 dgt)
40Hz - 500Hz
1500V peak
10MΩ
Current
Ranges
Auto/Manual ranging
AC True RMS
320µA, 3.2mA, 32mA, 300mA, 20A*
Manual ranging
AC avg. responding, rms reading
200µA, 2mA, 20mA, 200mA, 20A*
Resolution
Accuracy (DC)
Accuracy (AC)
0.1µA, 1µA, 10µA, 100µA, 10mA
±(1.0% rdg + 2 dgt),
±(2.0% rdg + 3 dgt) for 20A
±(2.5% rdg + 3 dgt)
0.1µA, 1µA, 10µA, 100µA, 10mA
±(1.0% rdg + 1 dgt),
±(2.0% rdg + 3 dgt) for 20A
±(1.5% rdg + 3 dgt),
Frequency Response
Overload Protection
±(2.5% rdg + 5dgt) for 20A
±(2.5% rdg + 4 dgt) for 20A
40Hz - 1kHz
40Hz-500Hz
High energy 600V, 1A full for µA/mA, High energy 600V, 15A for 20A
Resistance
Ranges
Resolution
Auto/Manual ranging
320Ω, 3.2kΩ, 32kΩ, 320kΩ,
3.2MΩ, 32MΩ
0.1Ω, 1Ω, 10Ω, 100Ω, 1kΩ, 10kΩ
Manual ranging
200Ω, 2kΩ, 20kΩ, 200kΩ,
2MΩ, 20MΩ
0.1Ω, 1Ω, 10Ω, 100Ω, 1kΩ, 10kΩ
Accuracy
Overload Protection
±(0.5% rdg + 2 dgt)
±(2.0% rdg + 5 dgt) for 32MΩ
600V peak
±(0.75% rdg + 1 dgt)
±(1.5% rdg + 5 dgt) for 20MΩ
600V peak
Diode Check
Continuity
Display
Tested at 1.5mA, 3.3V max typical tested at 1mA 3.2V max typical
Beeper sounds below 200Ω approx.
Beeper sounds below 100Ω approx.
0.53" LCD, 3200 count with
0.8" LCD, 1999 count
65-segment analog bargraph
Sampling rate
Operating Temperature
Power
2/sec., 12/sec. for bargraph
32° to 122°F (0°C to 50°C), <80% RH
Single 9V battery
2.5 /sec.
Battery life
Auto power off
DImensions (H x W x D)
Weight
200 hrs typ (alkaline)
Approx. 10 min.
6.88 x 3.19 x 1.25" (175 x 81 x 32mm)
18.3 oz. (519g)
250 hrs typ (alkaline)
Approx. 30 min.
6.88 x 3.5 x 1.5" (175 x 89 x 38mm)
12 oz. (353g)
Accessories
Five Year Warranty
SUPPLIED: Battery, test leads, rubber holster, manual
OPTIONAL: TL-1 Replacement Test Leads , TL-2A Deluxe Test Leads, TL-3 Accessory TIp Kit
(for TL-2A), TL-130A General Purpose DMM Kit, PR-28A High Voltage Probe,
CP-3 AC/DC Current Clamp Adapter
Carrying Case (not included): LC-29B
*10 A continuous, 20A for 30 seconds max.
For your nearest distributor, call 800-462-9832 or www.bkprecision.com
33