|
2709B Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Magnetic hanger | |||
|
Data Sheet
Auto Ranging True RMS Tool Kit® DMM
Model 2709B
TRUE RMS
Auto/ Manual Ranging
Select between Auto or
Manual ranging
The 2709B is a full featured auto ranging true RMS DMM that combines
performance, value and functionality. The 6600 count LCD has a green back light
that allows the meter to be used in dimly lit environments. The 2709B can
measure resistance values up to 66 M⦠and capacitance to 66 mF. With the auto
power off feature you wonât have to worry about accidental battery consumption.
Value-packed features make this meter a must in every "Tool Kit®".
Features
I Magnetic hanger
I True RMS
I Auto/manual ranging
I DC voltage to 1000 V
I AC voltage to 750 V
I Capacitance to 66 mF
I Diode test
I One-handed operation
I Large easy-to-read LCD with backlight
I Auto power off
I Measures up to 10 A (AC & DC)
I Resistance to 66 Mâ¦
I Frequency counter to 66 MHz
I Continuity test
Specifications
2709B
model
DC Volts
Ranges
660 mV, 6.6 V, 66 V, 660 V, 1000 V
Resolution
0.1 mV, 1 mV, 10 mV, 100 mV, 1 V
Accuracy
±(0.5 % rdg + 2 dgts)
Input Impedance
660 mV: >100 Mâ¦; 6.6 V: 10 Mâ¦; 66 V to 1000 V: 9.1 Mâ¦
Overload Protection
1000 VDC or 750 VACrms
AC Volts (True RMS) (50 Hz-500 Hz)
Ranges
660 mv, 6.6 V, 66 V, 660 V, 750 V
Resolution
0.1 mV, 1 mV, 10 mV, 100 mV, 1 V
Accuracy
660 mV range at 50 Hz to 60 Hz ±(1.5 % rdg + 8 dgts)
6.6 V to 660 V ranges: ±(1.5 % rdg + 8 dgts)
750 V range: ±(2.0 % rdg + 8 dgts)
Crest Factor
â¤3
Input Impedance
660 mV: >100 Mâ¦; 6.6 V: 10 Mâ¦; 66 V to 750 V: 9.1 Mâ¦
Overload Protection
1000 VDC or 750 VACrms
DC Current
Ranges
660 uA, 6600 uA, 66 mA, 400 mA, 10 A
Resolution
0.1 uA, 1 uA, 10 uA, 100 uA, 10 mA
Accuracy
660 uA to 400 mA ranges: ±(1.5 % rdg + 2 dgts)
10 A range: ±(3.0 % rdg + 3 dgts)
Input Protection
0.5 A/500 V & 10 A/600 V fast blow ceramic fuses
10A Input
10 A for 60 sec max. followed by a 10 minute cooling period
AC Current (True RMS) (50 Hz-500 Hz)
Ranges
660 uA, 6600 uA, 66 mA, 400 mA, 10 A
Resolution
0.1 uA, 1 uA, 10 uA, 100 uA, 10 mA
Accuracy
660 uA to 400 mA ranges: ±(2.0 % rdg + 10 dgts)
10 A range: ±(3.5 % rdg + 10 dgts)
Crest Factor
â¤3
Input Protection
0.5 A/500 V & 10 A/600 V fast blow ceramic fuses
10A Input
10 A for 60 sec max. followed by a 10 minute cooling period
Resistance
Ranges
660 â¦, 6.6 kâ¦, 66 kâ¦, 660 kâ¦, 6.6 Mâ¦, 66 Mâ¦
Resolution
0.1 â¦, 1.0 â¦, 10 â¦, 100 â¦, 1 kâ¦, 10 kâ¦
Accuracy
660 ⦠to 660 k⦠ranges: ±(1.2 % rdg + 5 dgts)
6.6 M⦠range: ±(2.0 % rdg + 5 dgts)
66 M⦠range: ±(3.5 % rdg + 5 dgts)
Open Circuit Voltage (typical) -0.45 VDC (-1.2 VDC on 660 ⦠range)
Overload Protection
500 VDC/ACrms
Capacitance
Ranges
6.6 nF , 66 nF, 660 nF, 6.6 uF, 66 uF, 660 uF, 6.6 mF, 66 mF
Resolution
1 pF, 10 pF, 100 pF, 1 nF, 10 nF, 100 nF, 1 uF, 10 uF
Accuracy
6.6 nF range: ±(3.0 % rdg + 30 dgts)
66 nF to 660 uF ranges: ±(3.0 % rdg + 5 dgts)
6.6 mF to 66 mF ranges: ±(5.0 % rdg + 20 dgts)
Overload Protection
500 VDC/ACrms
Frequency
Ranges
660 Hz, 6.6 kHz, 66 kHz, 660 kHz, 6.6 MHz, 66 MHz
Resolution
0.1 Hz, 1 Hz, 10 Hz, 100 Hz, 1 kHz, 10 kHz
Accuracy
±(0.1 % rdg + 3 dgts)
Sensitivity
10 Hz to 6.6 MHz: >2.5 Vrms, 6.6 MHz to 66 MHz:
>2.5 Vrms <5 Vrms
Minimum Pulse Width
>25 ns
Duty Cycle Limits
>30 % and <70 %
Overload Protection
500 VDC/AC rms
Diode Test
Test Current
1.2 mA (typical)
Resolution
1 mV
Accuracy
±(3.0 % rdg + 3 dgts)
Audible Indication
<0.03 V
Open Circuit Voltage
3.5 VDC (typical)
Overload Protection
500 VDC/ACrms
Continuity
Audible Indication
Less than 30 â¦
Response Time
100 ms
Overload Protection
500 VDC/ACrms
General
Display
3 3/4 digit, 6600 count LCD
Polarity
Automatic, positive implied, negative polarity indication
Overrange
OL or -OL is displayed
Low Battery Indication
Battery symbol will display when battery voltage drops below
operating levels
Measurement Rate
2 times per second
Auto Power Off
Approximately 30 minutes
Operating Environment
0ºC to 50ºC at <70 % relative humidity
Storage Environment
-20ºC to 60ºC at 0 to 80 % relative humidity
Accuracies
Stated accuracy at 23ºC +5ºC at <75 % relative humidity
Temperature Coefficient 0.1 x (specified accuracy) per ºC. (ºC to 18ºC, 28ºC to 50ºC)
Power
Single standard 9 volt battery, NEDA 1604, JIS 006P, IEC 6F22
Battery Life
150 hours typical
Dimensions
165 mm (H) x 78 mm (W) x 42.5 mm (D)
Weight
Approximately 10 oz. (285 g) with battery and hanger
Three-Year Warranty
Supplied Accessories: User manual, one set of test leads, one spare fuse, and 9V battery (installed)
Technical data subject to change
© B&K Precision Corp. 2013
Page 1 of 2
www.bk precision.com
Tel.: 714.921.9095
|
▷ |